4 TOLL FRE E: 1-8 00-798 -7398
Getting Started with Your Steam Mop - cont’d
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic flo ors.
On surfaces that have been tre ated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action . It is
always recommended to test an
isolated area of the surfac e to be
cleaned before proceed ing. We
recommend that you check th e use
and care instructions f rom the floor
manufacturer.
NOTE: To prolong the life of your
Steam Mop, we recommend using
distilled water.
2 Select either the All-Purpose M op
Head or Versa-Tile™ Mop Head and
accompanying pad. Use th e lavender
loop on the side of the micro-fi ber
cleaning pad to slide the mo p head
into the pad pocket. Then secu re
the quick fasteners on th e top of the
pocket to lock in place. (fig. 3)
3 Snap the mop head into the base to
secure it. (fig. 4)
4 Turn the water tank cap counter
clockwise and remove from the t ank.
(fig. 5)
Use the filling flask and pour water
into the tank. Do not overfill . Replace
the cap on the water tank. (fi g. 6)
fig. 3
fig. 4
fig. 5
fig. 6
S3901D_11_IB_E_110704_2.indd 4 11-07-04 11:07 AM