OPERATING INSTRUCTIONS

Assembling Your Cordless Sweeper

Your cordless sweeper will require very little assembly. You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing. (Pg. 2) This will help you in the assembly and operation of your cordless sweeper.

Note: The charging adapter will be shipped inside the packaging.

1.To assemble your sweeper, push the handle into the base. It will snap into place firmly. (Fig. 1)

Fig. 1

Fig. 2

2.To straighten the handle, simply lift the upper handle. The forward folding pivot will click into the straightened position as shown in Figure 2.

3.To fold the handle, press on the handle release button firmly while bending the handle forward. The forward folding pivot will click into the bent position as shown in Figure 3.

Fig. 3

OPERATING INSTRUCTIONS

Charging Instructions

1.Connect the charger plug to the charging jack or hole on the side of the sweeper. Plug the charging adapter into the wall outlet. (120V., 60Hz.) Use only charger Kuantech KA12D120015023U. (Fig. 4)

Charging

Light

Indicator

Fig. 4

2.This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be charged for a minimum 20 hours.

Important: After initial charging, your new cordless sweeper should not be left connected to the charging adapter for a period in excess of 24 hours. A normal charge cycle is approximately 12 hours. The manufacturer recommends that when charging the cordless sweeper, the unit be allowed to charge for approximately 12 hours and then be disconnected from the charging adapter. The charging adapter should be unplugged from the wall receptacle and stored in a convenient place until next use.

3.When recharging the unit, the "On/Off" switch must be in the "OFF" position.

4.The charging light indicator on the top of the sweeper will illuminate to indicate that the sweeper is properly charging.

5.To recharge, repeat step #1 above. Charging times will vary depending upon the amount of usage between charging cycles.

Note: If, when you place the sweeper to recharge and the charging indicator light does NOT illuminate, then press the On/Off button once to turn the sweeper off. The charging indicator light should now light up.

Note: Peak performance may only be realized after the unit has been charged and discharged two (2) or three (3) times.

Important: To maintain peak performance of your cordless sweeper, it is recommended that the unit be fully discharged, then completely re-charged at least once a month.

Caution:

•Use only the adaptor supplied with the sweeper.

•Do not clean the sweeper while unit is charging.

•Do not attempt to remove the battery pack from the unit to charge it.

•Never attempt to throw the battery pack or unit into a fire or incinerate it.

•Do not attempt to remove or damage the battery casing.

3

4

Page 2 Page 4
Page 3
Image 3
Shark V1950Q manual Operating Instructions, Assembling Your Cordless Sweeper, Charging Instructions
Page 2 Page 4

V1950Q specifications

The Shark V1950Q is an innovative vacuum cleaner that combines cutting-edge technology with powerful performance, making it a standout choice for homeowners seeking an efficient cleaning solution. One of the primary features of the V1950Q is its advanced DuoClean technology, which features dual brush rolls designed to work in harmony to engage both carpets and floors effectively. The soft front brush roll pulls in larger debris, while the stiff bristle roll deep cleans carpets, ensuring no dirt is left behind.

Another remarkable aspect of the Shark V1950Q is its lightweight design. This vacuum is easy to maneuver, allowing users to navigate around furniture and reach tight spaces effortlessly. The design is not only user-friendly but also portable, making it easy to carry up and down stairs or from room to room. The vacuum also features a versatile design that allows it to convert into a handheld vacuum, perfect for quick clean-ups, car interiors, and upholstery.

The V1950Q is equipped with a powerful suction that adapts to various surfaces—be it carpets, hardwood floors, or tiles. This adaptability is facilitated by its Smart Response technology, which automatically adjusts the suction power based on the surface being cleaned, ensuring optimal performance every time. This feature not only maximizes cleaning efficiency but also enhances battery life.

Moreover, the Shark V1950Q places an emphasis on user comfort with its ergonomic handle and intuitive controls. The vacuum is designed for ease of use, allowing users to switch between cleaning modes seamlessly. The included accessories, such as a crevice tool and upholstery brush, enhance its versatility, enabling it to tackle a range of cleaning tasks.

Filtration is another critical attribute of the Shark V1950Q. It features a HEPA filter that captures 99.9% of dust and allergens, making it an exceptional choice for allergy sufferers. This filtration system ensures that not only is the home left clean, but the air quality is also significantly improved.

In summary, the Shark V1950Q vacuum cleaner brings together innovative features, such as DuoClean technology, Smart Response adaptability, and a lightweight, ergonomic design. With powerful suction, a versatile handheld option, and a high-efficiency filtration system, the V1950Q stands out as a top choice for maintaining a clean and healthy living environment.
Top Page Image Contents