Error indications relating to NTP | Panasonic BLVT164P specs

21 About the displayed system log

Error indications relating to NTP

Category

Connection error

Internal error

Synchronizing with NTP succeeded.

Indication

No response from the NTP server.

Undefined error.

NTP update succeeded.

Description

•The IP address of the server may be incorrect. Check if the IP address of the server is configured correctly.

•The NTP server may be down. Ask the network administrator.

•An error occurred in the NTP function. Check if the NTP settings are configured correctly.

•Time correction succeeded.

Log indications relating to HTTPS

Category

HTTPS

Indication

Self-signed Certificate - Generated

Self-signed Certificate - Deleted

Certificate Signing Request - Generated

CA Certificate - Installed

CA Certificate - Deleted

Previous CRT key - Applied

CRT key - Generated

Description

•Generation of the self-signed certificate is complete.

•Deletion of the self-signed certificate is complete.

•Generation of the CSR (Certificate Signing Request) is complete.

•Installation of the server certificate is complete.

•Deletion of the server certificate is complete.

•Previous CRT key is applied.

•Generation of the CRT key is complete.

Log indications relating to login

Category

Login

Indication

User name or IP address

Description

•The login user name will be displayed when “On” is selected for “User auth.”.

•The IP address of the PC currently accessing to the camera will be displayed when “On” is selected for “Host auth.”.

168

Operating Instructions

Image 168

Panasonic BLVT164P Error indications relating to NTP, Log indications relating to Https, Log indications relating to login

Contents

Operating Instructions Network Camera Preface About notationsTrademarks and registered trademarks Abbreviations Viewer software Table of Contents 11.5 11.611.7 11.8 20.3 Installing the manuals 163 20.4 14816.4 18.1 Check the system log System log 154 18.2 Example of IPv4 access Example of IPv6 access Monitor images on a PCMonitor images from a single camera Monitor images on a PC Refresh interval of Jpeg images About the Live page BL-VT164W/BL-VT164 640x360 320x180 800x600 1280x720 Image quality buttonsAUX buttons*2 Zoom buttons*2 Preset*2 Alarm occurrence indication button*2Control pad/buttons*2 Brightness buttons*2 Available range 0 Snap shot button Mic input button*3Audio output button*3 Main area*2 Monitor images on a PC About the Live page BL-VP104W/BL-VP104/ BL-VP101 VGA 640x360 320x180 800x600 Zoom buttons Main area*2 Monitor images from multiple cameras Monitor images on a cellular phone/mobile terminal Monitor images on a cellular phone Monitor images on a cellular phone/mobile terminal Functions Outline of functions Monitor images on a mobile terminal Monitor images on a cellular phone/mobile terminal Click the button of the function that you want to operate Pan/Tilt VT164W VT164 Image in the aspect ratio AUX control Privacy Mode control VT164W Monitor images on a cellular phone/mobile terminal Action at an alarm occurrence Alarm typeAction at an alarm occurrence Action at an alarm occurrence Transmit images onto an FTP server About the network security Equipped security functions Display the setup menu from a PC How to display the setup menu How to operate the setup menu Example Display the setup menu from a PC About the setup menu window Maintenance button SetupAdvanced func. button User mng. button Configure the basic settings of the camera Basic Camera titleDate/time Time display format Date/time display formatSummer time daylight saving NTP/Time zone Indicator OSD PositionBrightness status display Alarm status update mode Alarm status reception portAutomatic installation of viewer software Wireless indicator Red/Orange/Green Default English Language Configure the Internet settings Internet UPnP Auto port forwarding Recommended network setting for internet Default 169 VT164W Aspect ratio Configure the settings relating to Jpeg images JPEG/H.264 Live page Initial displayRefresh interval Jpeg Image capture size Image quality setting Default 640x360 VT164WDefault Quality1 Image quality Configure the settings relating to H.264 images JPEG/H.264 Operating Instructions Internet mode over Http 2641/H.2642 Default Normal Transmission priorityFrame rate Max bit rate per client Refresh interval Transmission typeUnicast port1Image*2 Unicast port2Audio*2 Available value Default Multicast TTL/HOPLimit*3Smoother live video display on the browser buffering Default 1min Home positionSelf return Self return time Extra zoom About extra zoomDigital zoom Pan-Tilt degree/Zoom ratio display Image adjust Preset position VT164WExtra zoom VP104W VP104 Privacy zone Adaptive black stretch Light control mode Back light compensation BLCMask area Auto slow shutter Day & NightelectricalWhite balance Red gain Blue gain Chroma gain levelAperture level Pedestal level Divided into 48 Borders on the image displayed on the Image/Privacy tab will Image in the aspect ratio Register the preset positions Preset ID Preset ID 0-9,A-ZPosition No Zoom buttons, Brightness buttons, Control pad/buttons Set button Delete button Zone setting Privacy zoneDisplay type Zone select Area Close button Default G.726 Audio transmission/receptionAudio encoding format Mic input volume Camera to PC Audio output volume PC to CameraAudio bit rate Mic input interval Camera to PC Audio output port PC to Camera Permission level of audio trans./recepMuting while panning/tilting Configure the multi-screen settings Multi-screen IP addressExample of entry Available number of characters 1 128 characters Configure the alarm settings Alarm Configure the settings relating to the alarm action AlarmAlarm Terminal 1 VT164W VMD alarm Command alarmTerminal 3 VT164W Body heat sensor VT164W VT164 Camera action on alarm Available range DefaultTerminal alarm Default Off Terminal alarm Configure the settings relating to the alarm image Alarm Default Off VMD alarmDefault Off Command alarm Body heat sensor Alarm image Alarm output terminal setup Change the AUX name Alarm BL-VT164W/ BL-VT164 AUX title Configure the VMD settings VMD area VMD area setting BL-VT164W/BL-VT164Select a preset position Procedure for setting the VMD area VMD information additionInformation addition All areas button VT164W Status Detection areaDetection sensitivity Light detection control Mail notification Mail server Destination of notification Panasonic alarm protocol notification Panasonic alarm protocolAdditional alarm area dataVMD Destination port Available range Default XML notification XML notification Destination setting for XML notification Face detection Face detection Authentication User auth Password Retype password Access levelUser check Host auth Host check Priority stream ActivationDestination IP address1 Destination IP address2 Image capture size Configure the settings of the servers Server Configure the settings relating to the E-mail server E-mailSmtp server address Smtp port Configure the settings relating to the FTP server FTP Default NoneSender’s E-mail address Type Configure the settings relating to the NTP server NTP FTP modeDefault Passive FTP server address Time adjustment NTP server address settingDefault Manual NTP server address Time adjustment interval Default 1hTime zone Configuring the network settings Network Configure the network settings Network Network Settings IPv4 network IPv6 network Common UPnP Auto port forwardingCamera short cut CA Certificate CA Certificate install CRT key generateSelf-signed Certificate Generate Self-signed Certificate Information FTP access to camera Easy IP Setup accommodate periodBandwidth controlbit rate WAN Configure the Https settings Generation of the CRT key SSL encryption key Description Available number of characters Indication Generation of CSR Certificate Signing Request Installation of the server certificate Configuration of the connection protocol Access the camera using the Https protocol Install the security certificate 120 Operating Instructions Operating Instructions 121 122 Operating Instructions Operating Instructions 123 124 Operating Instructions Operating Instructions 125 OS Windows XP, Web browser When using Internet Explorer Operating Instructions 127 Click Finish Configure the settings relating to Ddns Ddns About Ddns services IPv4/IPv6About Dynamic DNS Update RFC2136 compliant Global address is changed Access using the current global address PersonalCamera URLYour Account Link Global address is obtained via the URL domain name Access interval When using Dynamic DNS Update Host name Configure the settings relating to Snmp Snmp CommunitySystem name Available number of characters 0 32 characters FTP periodic image transmission LocationContact Available number of characters 0 255 characters FTP periodic image transmission Transmission interval How to set the schedules How to delete the set schedule Operating Instructions 139 Click the Basic tab on the Wireless page. →page 34, Communication mode Default wifiAvailable number of characters 1 32 characters WEP key Hex characters 64bitHex characters 128bit Network key Alphanumeric characters 64bitAlphanumeric characters 128bit About Wi-Fi Protected Setup WPS Performing settings automatically with PIN code settings Using the PIN code configured to the wireless router Using a selected PIN code set to the camera Operating Instructions 147 Using the cameras Wireless QoS Basic Confirming the cameras wireless information StatusWireless QoS Wireless module status Firmware version WirelessOperation mode Auto setup WPS Authentication method Radio wave status Configure the settings relating to the schedules Schedule 152 Operating Instructions Body heat sensor permission VT164W Maintenance of the camera Maintenance Upgrade the firmware UpgradeCheck the system log System log Time & date Operating Instructions 155 Check the status Status Reset the settings/Reboot the camera Default reset Viewnetcam.com UPnPSelf check Reset to the default Except the network settings Load the default Html files setup menuReset to the default and load the default Html files Reboot Privacy Mode BL-VT164W/BL-VT164 Configuring the Privacy Mode with the Privacy button Configuring the Privacy Mode with the setup menu Turning the Privacy Mode off Using the CD-ROM About the CD launcher Installing Panasonic IP Setting Software Installing the manuals Installing the Viewer softwareFor Windows Vista/Windows 164 Operating Instructions Operating Instructions 165 Error indications relating to Smtp Error indications relating to FTPAbout the displayed system log Category Indication Error indications relating to Viewnetcam.com Error indications relating to Dynamic DNS UpdateCategory Error indications relating to NTP Log indications relating to loginLog indications relating to Https Panasonic alarm protocol notification error Troubleshooting SymptomCause/solution Reference pages When the camera and the PC are connected in the same subnet When communicating using IPv4 105 106 129 132 156 104 119 Installation Guide Operating Instructions 175 176 Operating Instructions Cannot connect to the wireless router When using Internet Explorer Information Bar Operating Instructions 179 For Europe and other countries PGQP1208YA C0312-1042