9 Configure the settings relating to images and audio [Image/Audio]
Note
VP101 :
•“Mask area” can be set only when “4:3” is selected for “Aspect ratio”. If the “Aspect ratio” is changed to “16:9” after setting the mask area, the setting of the mask area is maintained.
3.Click the divided areas to be masked.
→The clicked areas will be masked and will become white. To cancel masking, click the area again.
4.Click the [End] button after completing masking areas.
→ | VT164W | VT164 | : The borders on the image displayed on the [Image/Position] tab will disappear. | |
→ | VP104W | VP104 | VP101 | : The borders on the image displayed on the [Image/Privacy] tab will |
disappear.
IMPORTANT
VT164W | VT164 | VP104W | VP104 | : |
|
|
|
|
•When “4:3” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from the image of “16:9”. Therefore even when “4:3” is set, the brightness of the masked area will affect the image. It is recommended that the aspect ratio should be once set to “16:9” before masking.
64
