9 Configure the settings relating to images and audio [Image/Audio]
| A | A. Image in the aspect ratio of “16:9” | |||
|
|
|
|
| B. Areas where the image is not displayed when |
|
|
|
|
| “4:3” is selected for the aspect ratio |
|
|
|
|
| |
|
|
|
|
| C. Image in the aspect ratio of “4:3” (Being cut |
|
|
|
|
| out from the aspect ratio of “16:9”) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
BC
VP101 :
•When “16:9” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from the image of “4:3”. Therefore even when “16:9” is selected for “Image adjust”, the brightness of the masked area will affect the image.
A. Image in the aspect ratio of “4:3”
BB. Areas where the image is not displayed when “16:9” is selected for the aspect ratio
C.Image in the aspect ratio of “16:9” (Being cut out from the aspect ratio of 4:3)
C
Note
•When the [Reset] button is clicked, masking for all the masked areas will be canceled.
9.5.3Configure the settings relating to the preset positions (“Preset position” setup menu)
Click the [Setup>>] button of “Preset position” on the [Image/Position] tab of the “Image/Audio” page (→page 57).
It is possible to register, edit and delete the preset positions on this page.
When the brightness and zoom factor are adjusted, the adjustment will be applied immediately to the currently displayed image on the [Image/Position] tab.
Operating Instructions
65
