11 Configure the alarm settings [Alarm]
•Available range: 0-30
•Default: 2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8 destination server addresses can be registered.
•[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon an alarm occurrence.
•[Destination Server address]: Enter the destination server address or host name.
–Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen
To delete the registered destination server address, click the [Delete] button respective to the desired destination server address.
IMPORTANT
•When entering the host name of the “Destination Server address”, the DNS settings on the [Network] tab of the “Network” page must be configured. (→page 104)
•Confirm that the destination IP addresses are registered correctly. When a registered destination does not exist, notification may be delayed.
90
