Viewnetcam.com UPnP, Self check | Panasonic BLVT164P specification

18 Maintenance of the camera [Maintenance]

The status of this camera can be checked on this page.

[Viewnetcam.com]

•Server: The URL of the “Viewnetcam.com” service server will be displayed.

•Status: The registration status for the “Viewnetcam.com” will be displayed.

•Personal(Camera) URL: The URL of the camera registered for “Viewnetcam.com” will be displayed.

[UPnP]

•Port number(HTTP), Port number(HTTPS): The port number that is set for UPnP port forwarding will be displayed.

•Status: The port forwarding status will be displayed.

•Router global address: The global address of router will be displayed.

[Self check]

The self check result of the hardware will be displayed.

Note

•Refer to the [Readme] file on the provided CD-ROM for further information about the contents of the displayed statuses (relating to the “Viewnetcam.com” service, the UPnP function, or the self check). Or refer to our website (http://panasonic.net/pss/security/support/info.html) for further information about the supported software.

18.4Reset the settings/Reboot the camera [Default reset]

Click the [Default reset] tab of the “Maintenance” page. (→page 34, page 35)

Operating Instructions

157

Image 157

Panasonic BLVT164P Reset the settings/Reboot the camera Default reset, Viewnetcam.com UPnP, Self check

Contents

Network Camera Operating Instructions About notations PrefaceTrademarks and registered trademarks Abbreviations Viewer software Table of Contents 11.6 11.511.7 11.8 148 20.3 Installing the manuals 163 20.416.4 18.1 Check the system log System log 154 18.2 Monitor images on a PC Example of IPv4 access Example of IPv6 accessMonitor images from a single camera Monitor images on a PC Refresh interval of Jpeg images About the Live page BL-VT164W/BL-VT164 Image quality buttons 640x360 320x180 800x600 1280x720AUX buttons*2 Zoom buttons*2 Alarm occurrence indication button*2 Preset*2Control pad/buttons*2 Brightness buttons*2 Available range 0 Mic input button*3 Snap shot buttonAudio output button*3 Main area*2 Monitor images on a PC VGA About the Live page BL-VP104W/BL-VP104/ BL-VP101 Zoom buttons 640x360 320x180 800x600 Main area*2 Monitor images from multiple cameras Monitor images on a cellular phone Monitor images on a cellular phone/mobile terminal Monitor images on a cellular phone/mobile terminal Outline of functions Functions Monitor images on a mobile terminal Monitor images on a cellular phone/mobile terminal Click the button of the function that you want to operate Pan/Tilt VT164W VT164 Image in the aspect ratio AUX control Privacy Mode control VT164W Monitor images on a cellular phone/mobile terminal Alarm type Action at an alarm occurrenceAction at an alarm occurrence Action at an alarm occurrence Transmit images onto an FTP server Equipped security functions About the network security How to display the setup menu Display the setup menu from a PC Example How to operate the setup menu Display the setup menu from a PC About the setup menu window Setup Maintenance buttonAdvanced func. button User mng. button Camera title Configure the basic settings of the camera BasicDate/time Date/time display format Time display formatSummer time daylight saving NTP/Time zone OSD Position IndicatorBrightness status display Alarm status reception port Alarm status update modeAutomatic installation of viewer software Wireless indicator Red/Orange/Green Language Default English UPnP Auto port forwarding Configure the Internet settings Internet Recommended network setting for internet Aspect ratio Default 169 VT164W Live page Initial display Configure the settings relating to Jpeg images JPEG/H.264Refresh interval Jpeg Image capture size Default 640x360 VT164W Image quality settingDefault Quality1 Image quality Configure the settings relating to H.264 images JPEG/H.264 Operating Instructions 2641/H.2642 Internet mode over Http Transmission priority Default NormalFrame rate Max bit rate per client Transmission type Refresh intervalUnicast port1Image*2 Unicast port2Audio*2 Multicast TTL/HOPLimit*3 Available value DefaultSmoother live video display on the browser buffering Home position Default 1minSelf return Self return time About extra zoom Extra zoomDigital zoom Pan-Tilt degree/Zoom ratio display Preset position VT164W Image adjustExtra zoom VP104W VP104 Privacy zone Adaptive black stretch Back light compensation BLC Light control modeMask area Day & Nightelectrical Auto slow shutterWhite balance Red gain Chroma gain level Blue gainAperture level Pedestal level Divided into 48 Borders on the image displayed on the Image/Privacy tab will Image in the aspect ratio Register the preset positions Preset ID 0-9,A-Z Preset IDPosition No Zoom buttons, Brightness buttons, Control pad/buttons Delete button Set button Privacy zone Zone settingDisplay type Zone select Area Close button Audio transmission/reception Default G.726Audio encoding format Audio output volume PC to Camera Mic input volume Camera to PCAudio bit rate Mic input interval Camera to PC Permission level of audio trans./recep Audio output port PC to CameraMuting while panning/tilting IP address Configure the multi-screen settings Multi-screenExample of entry Available number of characters 1 128 characters Configure the settings relating to the alarm action Alarm Configure the alarm settings AlarmAlarm Terminal 1 VT164W Command alarm VMD alarmTerminal 3 VT164W Body heat sensor VT164W VT164 Available range Default Camera action on alarmTerminal alarm Default Off Terminal alarm Default Off VMD alarm Configure the settings relating to the alarm image AlarmDefault Off Command alarm Body heat sensor Alarm image Alarm output terminal setup AUX title Change the AUX name Alarm BL-VT164W/ BL-VT164 VMD area setting BL-VT164W/BL-VT164 Configure the VMD settings VMD areaSelect a preset position VMD information addition Procedure for setting the VMD areaInformation addition All areas button VT164W Detection area StatusDetection sensitivity Light detection control Mail server Mail notification Destination of notification Panasonic alarm protocol Panasonic alarm protocol notificationAdditional alarm area dataVMD Destination port Available range Default XML notification XML notification Destination setting for XML notification Face detection Face detection User auth Authentication Access level Password Retype passwordUser check Host check Host auth Activation Priority streamDestination IP address1 Destination IP address2 Image capture size Configure the settings relating to the E-mail server E-mail Configure the settings of the servers ServerSmtp server address Smtp port Default None Configure the settings relating to the FTP server FTPSender’s E-mail address Type FTP mode Configure the settings relating to the NTP server NTPDefault Passive FTP server address NTP server address setting Time adjustmentDefault Manual NTP server address Default 1h Time adjustment intervalTime zone Configure the network settings Network Configuring the network settings Network IPv4 network Network Settings IPv6 network Common Auto port forwarding UPnPCamera short cut CRT key generate CA Certificate CA Certificate installSelf-signed Certificate Generate Self-signed Certificate Information Easy IP Setup accommodate period FTP access to cameraBandwidth controlbit rate WAN Configure the Https settings Generation of the CRT key SSL encryption key Available number of characters Description Indication Generation of CSR Certificate Signing Request Installation of the server certificate Configuration of the connection protocol Install the security certificate Access the camera using the Https protocol 120 Operating Instructions Operating Instructions 121 122 Operating Instructions Operating Instructions 123 124 Operating Instructions Operating Instructions 125 OS Windows XP, Web browser When using Internet Explorer Operating Instructions 127 Click Finish About Ddns services IPv4/IPv6 Configure the settings relating to Ddns DdnsAbout Dynamic DNS Update RFC2136 compliant Global address is changed PersonalCamera URL Access using the current global addressYour Account Link Global address is obtained via the URL domain name Access interval Host name When using Dynamic DNS Update Community Configure the settings relating to Snmp SnmpSystem name Available number of characters 0 32 characters Location FTP periodic image transmissionContact Available number of characters 0 255 characters Transmission interval FTP periodic image transmission How to set the schedules How to delete the set schedule Operating Instructions 139 Click the Basic tab on the Wireless page. →page 34, Default wifi Communication modeAvailable number of characters 1 32 characters Hex characters 64bit WEP keyHex characters 128bit Alphanumeric characters 64bit Network keyAlphanumeric characters 128bit About Wi-Fi Protected Setup WPS Using the PIN code configured to the wireless router Performing settings automatically with PIN code settings Using a selected PIN code set to the camera Operating Instructions 147 Confirming the cameras wireless information Status Using the cameras Wireless QoS BasicWireless QoS Firmware version Wireless Wireless module statusOperation mode Auto setup WPS Radio wave status Authentication method Configure the settings relating to the schedules Schedule 152 Operating Instructions Body heat sensor permission VT164W Upgrade the firmware Upgrade Maintenance of the camera MaintenanceCheck the system log System log Time & date Operating Instructions 155 Check the status Status Viewnetcam.com UPnP Reset the settings/Reboot the camera Default resetSelf check Load the default Html files setup menu Reset to the default Except the network settingsReset to the default and load the default Html files Reboot Configuring the Privacy Mode with the Privacy button Privacy Mode BL-VT164W/BL-VT164 Turning the Privacy Mode off Configuring the Privacy Mode with the setup menu About the CD launcher Using the CD-ROM Installing Panasonic IP Setting Software Installing the Viewer software Installing the manualsFor Windows Vista/Windows 164 Operating Instructions Operating Instructions 165 Error indications relating to FTP Error indications relating to SmtpAbout the displayed system log Category Indication Error indications relating to Dynamic DNS Update Error indications relating to Viewnetcam.comCategory Log indications relating to login Error indications relating to NTPLog indications relating to Https Panasonic alarm protocol notification error Symptom TroubleshootingCause/solution Reference pages When communicating using IPv4 When the camera and the PC are connected in the same subnet 105 106 129 132 156 104 119 Installation Guide Operating Instructions 175 176 Operating Instructions Cannot connect to the wireless router Information Bar When using Internet Explorer Operating Instructions 179 PGQP1208YA C0312-1042 For Europe and other countries