11 Configure the alarm settings [Alarm]
3.Click the [Set] button after completing the settings.
IMPORTANT
• The setting will not be applied unless the [Set] button is clicked.
4.To invalidate the VMD area, click the [Set] button after selecting “Off” for “Status” of the VMD area to be invalidated.
→The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated, no alarm will occur even when a motion can be recognized in the area.
5.To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.
→The outline of the respective VMD area will disappear.
6.Click the [Set] button.
→The edited settings will be applied.
7.Click the [Back] button to return to the screen to select a preset position.
11.7Configuration of the settings relating to the
Click the [Notification] tab on the “Alarm” page. (→page 34, page 35)
The settings relating to the alarm
E-mail notification
[E-mail server >>]
When
Operating Instructions
87
