14 Configure the settings of the servers [Server]
[FTP server address]
Enter the IP address or the host name of the FTP server.
•Available number of characters: 1 - 128 characters
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen
IMPORTANT
•When entering the host name for “FTP server address”, it is necessary to configure the DNS settings on the [Network] tab of the “Network” page. (→page 104)
[User name]
Enter the user name (login name) to access the FTP server.
•Available number of characters: 1 - 32 characters
•Unavailable characters: " & : ; \
[Password]
Enter the password to access the FTP server.
•Available number of characters: 0 - 32 characters
•Unavailable characters: " &
[Control port]
Enter a control port number to be used for the FTP server.
•Available port number: 1-65535
•Default: 21
The following port numbers are unavailable since they are already in use.
20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[FTP mode]
Select “Passive” or “Active” for the FTP mode.
Normally, select “Passive”. When it is impossible to connect after select “Passive”, try to connect after selecting “Active”.
•Default: Passive
14.3Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the “Server” page. (→page 34, page 35)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page.
Operating Instructions
101
