Panasonic BLVT164P operating instructions Destination of notification

11 Configure the alarm settings [Alarm]

[E-mail notification]

Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.

–When an alarm is detected (“Alarm”)

• Default: Off

[Alarm image attachment]

Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is detected.

•Default: Off

Note

•The settings for “Image capture size” of the “Alarm image” section on the [Alarm] tab (→page 80) will be applied to the size of the image to be attached.

•When privacy mode is active, black images will be attached.

Destination of notification

[Address 1] - [Address 4]

Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.

•[Alarm] checkbox: When the checkbox is selected, the E-mail notification will be performed upon an alarm occurrence.

•[Destination E-mail address]: Enter the destination E-mail address.

–Available number of characters: 3 - 128 characters

–Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and the hyphen (-).

To delete the registered address, click the [Delete] button respective to the desired address.

[E-mail subject]

Enter the E-mail subject.

•Available number of characters: 0 - 50 characters

[E-mail body]

Enter the E-mail body.

•Available number of characters: 0 - 200 characters

11.8Configure the settings relating to Panasonic alarm protocol [Notification]

Click the [Notification] tab on the “Alarm” page. (→page 34, page 35)

88

Operating Instructions