Using the Video and Audio Input Terminals (Continued)

Notes:

COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback image than the image from IN 1 S-VIDEO terminal.

The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.

The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio cable to the IN 1 AUDIO terminals (left and right).

(Rear connection terminals of TV)

VCR

TO S-VIDEO OUTPUT (When your video equipment has an S-VIDEO output terminal).

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

To AUDIO

To COMPONENT

VIDEO OUTPUT

OUTPUT (L/R)

Terminals

Video Equipment with Component video (Component Color)

Output Terminals (Y, PB and PR)

To watch video material playback

Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play.

The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.

 

AIR

 

INPUT

1

 

INPUT 2

 

INPUT 3 (COMPONENT)

 

 

or

(IN 1)

 

(IN 2)

 

(IN 3)

 

CABLE

Rear

 

 

Front

 

Rear

 

 

 

 

 

 

 

 

 

 

When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PB and PR terminals simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest channel.

Note:

When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected.

The S-Video terminal has priority over the VIDEO terminal (IN 1).When you wish to use video equipment connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be obtained from copyright owners whenever necessary.

For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.

The connection cables/cords can be obtained from your local video store.

39

32C530(38-40)

39

1/29/03, 2:26 PM

Dimension: 140 X 215 mm

Page 39
Image 39
Sharp 32C530 operation manual To watch video material playback, Vcr