INSTALLING THE TD CARTRIDGE

1 Open the multi-bypass tray, and then open the side cover.

2 Remove the CAUTION tape from the front cover and remove the two protective pins from the fusing unit by pulling the strings upward one at a time.

Protective pins

CAUTION tape

3 Push gently on both sides of the front cover to open the cover.

4 Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge on both sides and shake it horizontally four or five times. Hold the tab of the protective cover and pull the tab to your side to remove the cover.

4 or 5 times

10