MISFEED REMOVAL
When the misfeed () indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the document feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear () key is pressed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed () indicator will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF" (p.67).
1 Open the
To open the
2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed () indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.64).
If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.66)
If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.65)
If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.64)
8
63