2

SETTING UP THE UNIT

 

Follow the installation procedure below to use the unit properly.

If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61).

 

2

 

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown below.

1Open the package, and make sure that all the accessories are supplied with the unit. (p.8)

2Remove the protective materials. (p.9)

3Install the TD cartridge. (p.10)

4Load the paper in the paper tray (p.15) or the multi-bypass tray . (p.17)

5Plug the other end of the power cord into the nearest outlet. (p.12)

6Install the software.* (p.19)

7Connect the interface cable* (p.45) and turn on the unit. (p.12)

8Now, you can copy (p.46), print (p.33), or scan (p.34) your document.

*If you are only using the unit for copying, skip this step.

7