Main
code Sub
code Contents Details of operation Initial
value Set range
22 16 Duplex print counter
display Used to display the current duplex print counter value. ∗1
17 Copy counter display Used to display the current copy counter value. ∗1
18 Printer counter display Used to display the current printer counter value. ∗1
19 Electronic sort counter
display Used to display the current electronic sort counter value. ∗1
20 FAX print counter display Used to display the current FAX print counter value. ∗1
21 Scanner counter display Used to display the current scanner counter value.
24 1JAM memory, JAM
counter clear Used to clear the JAM memory and the JAM counter. ∗2
2Trouble memory clear Used to clear the trouble memory. ∗2
4SPF counter clear Used to clear the SPF counter. ∗2
5Duplex counter clear Used to clear the duplex counter. ∗2
6Paper feed counter clear Used to clear the paper feed counter. ∗2
7Drum counter clear Used to clear the drum counter. ∗2
8Copy counter clear Used to clear the copy counter. ∗2
9Printer counter clear Used to clear the printer counter. ∗2
10 Electronic sort counter
clear Used to clear the electronic sort counter. ∗2
11 FAX print counter clear Used to clear the FAX print counter. ∗2
13 Scanner counter clear Used to clear the scanner counter.
25 1Main motor operation
check Used to drive the main motor for 30 sec. At that time, the cooling motor
rotates at a low speed.
When the developing unit is installed, the developing bias, the grid, and
the main charger are driven.
When the developing unit is not installed, only the main motor is driven.
10 Polygon motor operation
check Used to drive the polygon motor for 30 sec.
26 1Operation switch display Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)
Key operation Display
Display select:
Magnification ratio key <Lighting with an option installed>
When "A" is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED
Dehumidifying heater: Main body JAM LED
Simplex mode: Multi manual paper feed select LED
When "B" is displayed:
Cassette (2nd step): No. 2 cassette select LED
Cassette (3rd step): No. 3 cassette select LED
Cassette (4th step): No. 4 cassette select LED
Memory installed: Paper empty LED
FAX: JAM LED
Printer: Main body JAM LED
ERDH: Main cassette select LED
16CPM: SPF JAM LED
20CPM: SPF select LED
Document sensor: Auto paper select LED
3Auditor setting Used to display the current auditor setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
Key operation/Display
0: Built-in auditor
1: Coin vendor
2: Others
∗1: Each counter display method
To display 12345: 123 (0.75 sec) → Blank (0.35sec) → 456 (0.75 sec) → Blank (1.0 sec) → repetition
∗2: Display after clearing each counter
000 (0.75 sec) → Blank (0.35sec) → 000 (0.75 sec) → Blank (1.05 sec) → Repetition
AR-160/160 FM/E [8] SIMULATION 12/1/1998
AR-161
8 – 6