Sharp AR-F152 operation manual Making Copies, Normal Copying

2

Making copies

MAKING COPIES

This chapter describes basic copying functions and some other copying functions using the bypass tray.

NORMAL COPYING

This copier has two document input stations - a single pass feeder (SPF) for automatic document feeding and an original table for manual handling of documents.The SPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 10" x 14" and weighing from 14 to 23 lbs.

Ensure that paper of the desired size is set in the paper tray. See page 10, LOADING COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the

paper output tray extension. Use the tray select () key to select the desired paper tray.

Turn the power switch on.

The ready () indicator will light up.

●The copier will enter a power save mode once the set time has elapsed without any copier operation after the last copy of a run is made or power is turned

on.

The settings of the power save modes can be modified. See page 21, USER PROGRAMS.

●The copier will return to the initial settings a preset amount of time after the last copy is made.The preset amount of time (auto clear time) can be changed. See page 21, USER PROGRAMS.

12