Sharp AR-F152 operation manual Two-Sided Copying

BYPASS FEED

2

Making copies

Print face

Press the tray select () key to select the bypass tray. Set the number of copies if

using standard copy paper. Press the print ( ) key.

TWO-SIDED COPYING

Two-sided copying can be made on this copier using the bypass tray.

Example: The following two originals will be copied onto two sides of copy paper.

First original Second original

Face up or face down
Face up	Face down

Place the first original on the original table and make a copy.

The first copy can be made using either the paper tray or the bypass tray.

Replace the first original with the second original on the original table and close the original cover. Make sure that the first and second originals are oriented in the same way on the original table.

Both the first and second originals can be set in the SPF but they must be set separately. If the stream feeding mode for the SPF has been enabled, set the second original after the SPF () indicator goes out. See page 15.

18