NORMAL COPYING
Place the original(s) face up in the document feeder tray or face down on the original table.
A.When using the SPF:
(1)Make sure that no original is left on the original table.
(2)Adjust the original guides to the size of originals.
(3)Set the originals face up in the document feeder tray.
●Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them.
●Before placing curled or wavy originals into the document feeding tray, be sure to flatten them. If not, original misfeeds may result.
●The SPF (
) indicator on the operation panel will light up. If this indicator does not light up, the originals are not properly set or the SPF is not properly closed.
●Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the original table.
●Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the original table.
Original face up
B.When using the original table:
(1)Open the original cover.
(2)Place an original face down on the original table. Align it with the original scale and the centering (
) mark. Close the original cover.
Original scale
mark
2
Making copies
13
