5
Copier trouble?
STATUS INDICATORS
When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page.
Be sure to use only genuine SHARP parts and supplies.
| Indication |
| Cause and remedy | See |
|
| page: | ||
|
|
|
| |
| Developer | Steadily | Developer is required. Contact your SHARP | 32 |
| replacement | |||
| lit | service center as soon as possible. |
| |
| required indicator |
| ||
|
|
|
|
|
| Toner cartridge | Steadily | Replacement of toner cartridge will be needed | _ |
|
| |||
| lit | soon. Obtain a new cartridge. |
| |
| replacement |
| ||
|
|
|
| |
|
| Toner cartridge must be replaced. Replace it with | 23 | |
| required indicator | Blinking | ||
|
|
| a new one. |
|
|
|
| A misfeed has occurred. Remove the misfed | 27 |
| Misfeed indicator | Blinking | paper referring to the description of “Misfeed |
|
| removal.” | _ | ||
|
|
| The lower side cover may be open. If so, close it. | |
|
|
|
| |
|
|
|
|
|
| Maintenance | Steadily | Service by an authorized SHARP service | 32 |
| indicator | lit | technician is required. |
|
|
|
|
|
|
| SPF misfeed | Blinking | An original misfeed has occurred in the SPF. | 31 |
| Remove the misfed originals referring to the |
| ||
| indicator |
| ||
|
| description of “Misfeed in the SPF”. |
| |
|
|
|
| |
|
|
|
|
|
| The paper tray indicator | The paper tray is not installed properly. | _ | |
|
| |||
| is blinking. |
| Push the tray into the copier securely. |
|
|
|
|
| |
| “CH” is blinking in the | The toner cartridge is not installed. Install the toner | 23 | |
| display. |
| cartridge. If “CH” is blinking even if the cartridge is |
|
|
|
| installed properly, contact your SHARP service |
|
|
|
| center immediately. |
|
|
|
|
|
|
| “CH” is steadily lit in the | Side cover is open. Close the side cover securely | _ | |
| by pressing the round projections near the side |
| ||
| display. |
|
| |
|
| cover open button. |
| |
|
|
|
| |
|
|
|
|
|
|
|
| Paper tray or bypass tray is empty. Load copy | 10 |
| “P” is blinking in the display. | paper. |
| |
|
|
| A misfeed has occurred in the paper tray or | 27 |
|
|
| bypass tray. Remove the misfed paper. |
|
| A letter and a number | The copier will not function. Turn the power | _ | |
|
| |||
| switch off, remove the power cord from the |
| ||
| appear alternately. |
|
| |
|
| outlet, and contact your SHARP service center. |
| |
|
|
|
| |
|
|
|
|
|
The memory backup function for facsimile maintains data only for approximately one hour. When any facsimile data is kept in memory, do not keep the copier power turned off (by unplugging the power cord) for a long time even if the copier stops due to trouble.
34