Sharp AR-M205, AR-M160 operation manual Customizing Settings, User Programs

CUSTOMIZING SETTINGS

(User programs)

The user programs allow you to customize the machine to match your needs.

USER PROGRAMS

Program		Setting codes
	Program name	(factory default setting		Explanation
number
		appears in bold)
		1: OFF	• "Auto clear time" automatically returns the copy
		2: 10 sec.
			settings to the initial settings (p.12) when a
		3: 20 sec.
1	Auto clear time		certain period of time elapses after a copy is
		4: 60 sec.
			made. This program is used to select the period
		5: 90 sec.
			of time. "Auto clear time" can also be disabled.
		6: 120 sec.
			• This function automatically switches the
		1: 1 min.	machine to a low power consumption state if
			the set duration of time elapses without the
		2: 5 min.	machine being used when the power is on. The
2	Preheat mode	3: 30 min.	POWER SAVE indicator lights up, however, the
		4: 60 min.	keys on the operation panel can be used.
		5: 120 min.	Normal operation automatically resumes when
		6: 240 min.	a key on the operation panel is pressed, an
			original is placed, a print job is received, or
			scanning is begun from a computer.
			• This function automatically switches the
			machine to a state that consumes even less
			power than preheat mode if the set duration of
		1: 5 min.	time elapses without the machine being used
			when the power is on. All lights except the
		2: 30 min.
	Auto power shut-off		POWER SAVE indicator and ON LINE indicator
3		3: 60 min.
	timer		go off. To resume normal operation, press the
		4: 120 min.
			[START] key (	). Normal operation also
		5: 240 min.
			resumes automatically when a print job is
			received or scanning is begun from a computer.
			While in auto power shut-off mode, no keys
			(except the [START] key (		)) can be used.
			• When copying using the SPF/RSPF, during the
		0: OFF	period of time that the SPF/RSPF indicator
4	Stream feeding mode*1		blinks after an original has been scanned
		1: ON	(about 5 seconds), a subsequent original can
			be placed and automatically fed into the
			machine.
5	Auto power shut-off	0: OFF	• Use this setting to enable or disable auto power
	setting	1: ON	shut-off.
		1: OFF	• When copying multiple originals onto a single
6	Border line for 2 IN 1 / 4		sheet of paper (2 IN 1 / 4 IN 1 copy), this
	IN 1*2	2: Solid line	function can be used to print a solid or broken
		3: Broken line
			borderline around each original image.

*1On models with a SPF/RSPF.

*2On models with a dual function board.

44