Sharp AE-Z48LZ, AY-ZP48LZ operation manual Contents, Important Safety Instructions

This manual explains the proper use of your new heat pump. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference.

CONTENTS

•IMPORTANT SAFETY INSTRUCTIONS	1
•PART NAMES	2
•USING THE REMOTE CONTROL	4
•SETTING AIR PURIFYING FILTER	5
•TIPS ON SAVING ENERGY	5
•AUXILIARY MODE	5
•BASIC OPERATION	6
•ADJUSTING THE AIR FLOW DIRECTION	7
•COANDA AIRFLOW	8
•SPOT AIR	8
•FULL POWER OPERATION	9
•ENERGY SAVING OPERATION	9
•1.2.3.5h OFF TIMER	10
•TIMER OPERATION	10
•PLASMACLUSTER OPERATION	12
•SELF CLEAN OPERATION	12
•VACANCY OPERATION	13
•ADDITIONAL NOTES ON OPERATION	13
•MAINTENANCE	14
•BEFORE CALLING FOR SERVICE	15
•SPECIFICATIONS	15

	IMPORTANT SAFETY
	INSTRUCTIONS
WARNINGS FOR USE
1	This model should be installed with a fixed
	power cord to the meter box.
2	Be careful not to expose your body to the outlet
	air for prolonged periods. It may affect your
3	physical condition.
	When using the unit for infants, children,
	elderly, bedridden or disabled people make
	sure the room temperature is suitable for those
4	in the room.
	Never insert objects into the unit. Inserting
	objects can result in injury due to the high
5	speed rotation of the internal fans.
	If anything abnormal is noticed with the
	air conditioner (eg burning smell), stop the
	operation immediately and turn the circuit
6	breaker off.
	This unit should be installed by a licensed heat
	pump contractor in accordance with AS/NZS
	3000 and your electricity suppliers service
7	rules.
	There are local council rules regarding
	maximum allowable noise levels emitted by
	heat pump, your licensed heat pump contractor
	will advise you on the correct location of your
8	outdoor unit.
	If the supply cord is damaged, it must be
	replaced by the manufacturer or its service
	agent or a similarly qualified person in order
	to avoid a hazard. Use only the manufacture-
9	specified power cord for replacement.
	Do not pour water directly on the unit. Water
	can cause electrical shock or equipment failure.

IMPORTANT SAFETY

INSTRUCTIONS

WARNINGS FOR INSTALLATION/REMOVAL/ REPAIR

For your safety, ensure that your new heat pump is installed by a licensed heat pump contractor in accordance with the AUSTRALIAN/NEW ZEALAND WIRING RULES.

•Do not attempt to install/remove/repair the unit by yourself. Incorrect installation could cause electric shock, water leak, fire etc. Consult a licensed heat pump contractor for the installation/removal/ repair of the unit.

CAUTIONS FOR USE

1	If a gas appliance is used in the same room as
	the heat pump, ventilate the room periodically
2	to prevent oxygen depletion.
	For safety, do not touch the unit with wet hands,
	it may cause an electric shock.
3	For safety, turn the circuit breaker off when not
	using the unit for an extended period of time.
4	For safety, do not place anything on top of the
	outdoor unit or step on it.
5	This unit is designed for residential use. Do not
	use for other applications such as in a kennel
6	or greenhouse to raise animals or grow plants.
	Do not block the air inlets or outlets of the unit.
	It may result in degraded performance or unit
7	damage/failure.
	For safety, be sure to turn the unit off at
	the circuit breaker before performing any
8	maintenance or cleaning.
	This appliance is not intended for use by young
	children or infirm persons unless they have

been adequately supervised by a responsible person to ensure that they can use the appliance safely.

Young children should be supervised to ensure that they do not play with the appliance.

CAUTIONS FOR LOCATION/INSTALLATION

To ensure that your warranty is not affected, both the indoor/outdoor units and supply/interconnecting cables must be installed by a licensed heat pump contractor.

•The unit is designed to operate on 220-240 VAC, 50Hz.

•Do not install the unit where flammable gas may leak. It may cause a fire.

1