USING THE REMOTE CONTROL
LOADING BATTERIES
Use two
1
2 Insert batteries, making sure the (+) and
3 Replace the cover.
Cover 
4 Press the RESET Button.
•The display indicates “AM 6:00” when batteries are properly installed.
NOTE:
•The battery life is approximately one year in normal use.
•Replace the batteries when the remote control
displays " 
".
•When you replace the batteries, always change both batteries, and make sure they are the same type.
•If the remote control does not operate properly after replacing the batteries, press the RESET button.
•If you will not be using the unit for a long time, remove the batteries from the remote control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit’s signal receiver window and press the desired button. The unit generates a beep when it receives the signal.
•Make sure there is no object between the remote control and the unit.
•The signal effective distance is 7m.
CAUTION:
•Do not expose the receiver window to direct sunlight. This may adversely affect its operation.
•Use of certain fluorescent lamp in the same room may interfere with transmission of the signal.
•Do not leave the remote control in direct sunlight or near a heater. Protect the unit and remote control from moisture and shock.
SET CURRENT CLOCK TIME
There are two clock modes:
Example: 5 o’clock in the afternoon
Clock | Display |
PM 5:00 | |
17:00 |
1 To set to the
To set to the
2 Press the TIME ADVANCE or REVERSE button to set the current time.
•Keep the button pressed to advance or reverse the time display quickly.
3 Press the SET/C button.
• The colon (:) blinks to indicate that the clock is functioning.
3
2
1
NOTE:
•The current time cannot be set when the timer is operating.
4
