Jpeg File Playback, Playing back Slide Show

JPEG File Playback

CD-R CD-RW

JPEGJPEG

4Press TSKIP/k or USKIP/l to replace one image with another.

•The same operation can be performed by pressing c/d or SREV/VFWD.

•Press nRETURN if you wish to return to the folder selection screen.

5To stop the still image playback at any time, press HSTOP.

Playing back Slide Show

1In Step 2 of the left side “Playing back still images in a selected folder”, press d PLAY (Slide Show).

•The still images inside the selected folder are played as a slide show.

2To pause the playback at any time, press

FPAUSE.

• Press d PLAY to resume playback.

NOTE

•This Player can play still images (JPEG files) that have been recorded on CD-RW/R discs. For details on the still images that you can play using this player, refer to “About the JPEG file format” on page 7.

•During “Normal play”, still images are played one by one while during “Slide show”, they are automatically replaced one after another.

Playing back still images in sequence

1Load the disc containing the still images, and press d PLAY.

•The first still image appears on the screen.

•Press TSKIP/k or USKIP/l to proceed to the next or previous still image.

The same operation can be performed by pressing c/d or SREV/VFWD.

2To stop the still image playback at any time, press HSTOP.

Playing back still images in a selected folder

1Load the disc containing still images, then press

SETUP.

2Press a/b/c/d to select “Picture”, then press

ENTER.

3Use a/b/c/d to select the folder whose still images are to be played, then press ENTER.

8/15

1/77

3To stop the play at any time, press HSTOP.

•Press nRETURN to play a slide show of still images in another folder.

Setting slide show speed/repeat playback

1Press C (Blue) (Slide Show Menu) during the folder selection screen.

•The setting screen for “Slide Show Speed”/“Repeat Mode Setting” appears.

2Press a/b to select “Slide Show Speed”, then press ENTER.

Slide Show Speed

Repeat Mode Setting

Normal

•The slide show speed may be selected from “Fast”, “Normal”, “Slow1” and “Slow2”.

3Press a/b to select the desired speed, then press ENTER.

4Press a/b to select “Repeat Mode Setting”, then press ENTER.