Sharp BD-HP20H Video Connections

Connecting to the HDMI Terminal

You will enjoy high quality digital picture and sound through the HDMI terminal.

When you use AQUOS LINK, make sure to use a certiﬁ ed HDMI cable.

This Player

HDMI cable

(commercially available)

TV

Projector AV receiver

Equipment with an HDMI terminal

After connecting

• Load a disc and start playback. (Pages 25-28)

• If desired, connect audio equipment. (Pages 18-20)

• Refer to AQUOS LINK function. (Pages 24 and 42)

STEPS

1: Be sure to turn off this Player and the equipment before making any connections.

2: Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).

1To HDMI OUT terminal

2To HDMI input terminal

Change the video output to HDMI

video out

When you connect both an HDMI cable and a component

cable to this player, switch to the output terminals by remote

control.

(The video output is not output both terminals.)

NOTE

• When you connect this player to the TV of SHARP with an HDMI

cable only and if the TV is on, the video output is changed to

HDMI output automatically.

The following setting is unnecessary.

• When you connect to the TV with an HDMI cable only, HDMI video

output is set to AUTO. If you don’t get the normal image, select

the desired resolution.

• When you are setting HDMI video output besides AUTO, you can

only select the resolution that corresponds to the connected TV.

Caution:

• HDMI output and Component Video output

can not be used at the same time.

Turn on the power.

Press HDMI button for 5 seconds, and the

change of “Component Video Out” and “HDMI

Out” is possible.

• (To switch outputs, it is necessary to keep the button

pressed for several seconds.)

Also, when the HDMI button is pressed, the current

setting conditions will display while ﬂ ashing (blinking),

and then the selected output lamp displays.

“ ” or “ ” is displayed

alternately on the front panel display.

1

2

3

Caution:

•

Even when there is no cable connected to the Component video out,

switching the output to CP-out (Component video out) is still possible.

When CP-out is selected, there will be no signal from the HDMI

video out.

• When using an HDMI output, 7.1 ch

Digital Output is available.

15

Connection

o

Video Connections

BD-HP20H_en_b.indd 15BD-HP20H_en_b.indd 15 2007/09/27 16:16:442007/09/27 16:16:44

Contents

Main BD-HP20H TINSEA124WJQZ TERMS OF GUARANTEE OPERA TION MANUAL SAFETY INFORMATION Power Cord Protection ENGLISH Contents n o p q What would you like to do with this Player? DEAR SHARP CUSTOMER Page A. Information on Disposal for Users (private households) 1. In the European Union 2. In other Countries outside the EU B. Information on Disposal for Business Users 1. In the European Union 2. In other Countries outside the EU Blu-ray Disc About Discs A Quick Reference for Selecting Discs About Discs Discs that Cannot Be Used with About Disc Contents Title, Chapter and Track Example 2: Audio CD Example 1: Blu-ray disc or DVD Icons Used on DVD Video Disc Cases Important Information Disc Precautions Be Careful of Scratches and Dust Proper Disc Storage Handling Precautions Getting Started Major Components Main Unit (Front) Main Unit (Rear) Major Components Introduction to Connections Connecting to the HDMI Terminal Equipment with an HDMI terminal 1 2 Video Connections Video Connections Connecting to the Component Jacks Video equipment with component jacks Connect audio equipment or the audio terminals of the TV. (Pages 18-20) Video Connections Connecting to the S-video or Video Jack Video equipment with an S-video or video jack Connect audio equipment or the audio terminals of the TV. (Pages 18-20) Connecting 5.1 ch Speakers through an Ampli er Audio Connections Audio Connections Connecting to the Digital Audio Terminal or Jack Audio equipment with a digital audio input terminal or jack Audio Connections 1 2 Before Starting Playback Loading the Batteries in the Remote Control Press down on the tab in the direction of the arrow to remove the battery cover. Slide the battery cover in the direction of the arrow until it clicks. Approximate operating range of remote control Setting the Remote Control Code Setting the Remote Control Code of the Remote Setting the Remote Control Code of the Player TV function control Operating the TV of SHARP Using the Remote Control Turning the Power On Turning the power on Language Setting Changing the on-screen display language Indicators on the Player Turning Off the LCD Backlight and Indications Quick operation Press LIGHT to turn the LCD backlight on or off. SETUP MENU operation Press c/d to select ON or OFF, then press ENTER. Press SETUP or EXIT to exit. BD/DVD/CD Playback Loading a Disc BD/DVD Video Playback To stop playback Resume playback function BD/DVD Menus Using the disc menu 26 The top menu screen is displayed. Press SETUP or EXIT to exit.4 BD-R/-RE/DVD-R/-RW Playback Playback from the beginning Press H STOP to stop playback. Load a disc recorded in Video mode. Press dPLAY. Playback by selecting a title Audio CD Playback Playback from the beginning Playback Functions Fast Forward/Reverse (Search) Skipping to the Next or the Start of the Current Chapter (Track) Slow Playback Pause/Frame Advance Playback Playback Functions Partial Repeat Playback (Repeat Playback of a Speci ed Part) Press REPEAT during playback. Press c/d to select SCENE SELECTION, then press ENTER. Switching Audio SET START POINT displays. Playback Functions Switching the Angle Press ANGLE during playback. Displaying the Angle Mark Settings During Playback Function Control Function control operation procedure Press FUNCTION during playback. Press a/b to select the desired setting, then press ENTER. Settings During Playback Functions which can be set 33 Repeat Title Number (Direct Title Skip) SETTINGS AUDIO VIDEO SETTINGS TV ASPECT RATIO TV TYPE COMPONENT VIDEO OUT HDMI VIDEO OUT HDMI AUTO DETECTION AUDIO OUT 36 2. You can set the audio output mode for each output terminal. AUTO PCM (SURROUND) DOLBY DIGITAL DTS BITSTREAM PCM (STEREO) DYNAMIC RANGE CONTROL Basic Operation for AUDIO VIDEO SETTINGS 39 SPEAKER SETTINGS Using 2 channel speakers About speakers Basic Operation for SPEAKER SETTINGS Press SETUP to display the SETUP MENU Checking the setup sound Press a/b/c/d to select TEST START, then Completing the settings 12 Resetting the setup 13 10 11 QUICK START AUTO POWER OFF AQUOS LINK PLAYBACK SETTING PARENTAL CONTROL DISC LANGUAGE (DISC PRIORITY LANGUAGE) ANGLE MARK DISPLAY PIN CODE SETTING Country Code List Language Code List Basic Operation for PLAYBACK SETTING 46 FRONT DISPLAY/LED This item is for the customer service setting. ON OFF Press SETUP or EXIT to exit.5 RESET NOT RESET Troubleshooting Troubleshooting Appendix On-screen Error Messages Messages Relating to BD and DVD Glossary BD-J application BD-R (pages 7, 27) BD-RE (pages 7, 27) BD-ROM Glossary Speci cations General Playback Input/Output TERMS OF GUARANTEE BD-HP20H TINSEA124WJQZ