Audio Connections

Connecting to the Digital Audio Terminal or Jack

You can connect audio equipment to the DIGITAL AUDIO OUT terminal or jack.

STEPS

1:Be sure to turn off this Player and the equipment before making any connections.

2:Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals or a coaxial digital cable (commercially available) to the coaxial digital audio jacks (1 and 2, or 3 and 4).

This Player

•When using COAXIAL/OPTICAL output, 5.1 ch Digital Output is available.

7.1 ch Digital Output is not available.

To COAXIAL	To OPTICAL	1

3 jack	terminal

Coaxial digital cable		Optical digital cable
	or
(commercially available)		(commercially available)

To coaxial	To optical
4 input jack	input terminal	2

Ampliﬁer

Audio equipment with a digital audio input terminal or jack

After connecting

• Load a disc and start playback. (Pages 25-28)

o Connection

Page 21

Image 21

Sharp BD-HP20H operation manual Audio Connections, Connecting to the Digital Audio Terminal or Jack

Contents

BD-HP20H Page Power Cord Protection Safety Information Contents What to do ﬁrst Dear Sharp Customer Additional Safety Information Introduction Important Safety Instructions Information on Disposal for Business Users European Union Other Countries outside the EU Blu-ray Disc About DiscsTypes of Discs that Can Be Used with This Player Quick Reference for Selecting Discs Discs that Cannot Be Used with This Player About Discs About Disc Contents Disc Precautions Important InformationCopyright Getting Started Adjust settingsUnpacking Selecting equipment to connect Major Components Main Unit FrontMain Unit Rear Remote Control Unit Major ComponentsKeylock function Introduction to Connections Video terminals/jacks on this PlayerAnalogue audio connection After connecting Change the video output to Hdmi video out Connecting to the Hdmi TerminalVideo Connections Steps Connecting to the Component Jacks After connectingVideo Connections You will enjoy the images through the S-video or video jack Connecting to the S-video or Video JackVideo jack Yellow To Video jack AV cable supplied InputTo videojack Connecting 5.1 ch Speakers through an Ampliﬁer Audio ConnectionsAmpliﬁer Connecting to the Digital Audio Terminal or Jack Audio ConnectionsTo coaxial To optical Input jack Input terminal Connecting the Audio Jacks To 2CH Audio Output jacksTo audio Input jacks White Red Before Starting Playback Connecting the Power CordLoading the Batteries in the Remote Control Setting the Remote Control Code Operating the TV of Sharp Using the Remote ControlBefore Starting Playback Language Setting Turning the Power On Setup Menu operation Using Aquos LinkControlling the Blu-ray disc player using Aquos Link Turning Off the LCD Backlight and Indications Loading a Disc BD/DVD/CD PlaybackBD/DVD Video Playback To stop playback BD/DVD/CD Playback Using the disc menuBD/DVD Menus Start playback by selecting a title from the top menu BD-R/-RE/DVD-R/-RW Playback Playback from the beginningPlayback by selecting a title Playback by selecting a Play List Audio CD PlaybackSorting the titles Playing back the title you stopped while being played Playback Functions Switching Subtitles Switching AudioPlayback Functions Partial Repeat Playback Repeat Playback of a Speciﬁed Part Playback Setting Angle Mark DISPLAY. Switching the AngleDisplaying the Angle Mark Press Angle during playback Settings During Playback Function control operation procedureFunction Control Functions which can be set Settings During Playback This sets the resolution of the component video output TV TypeComponent Video OUT Hdmi Auto Detection SettingsAudio OUT This sets the audio output connected to Surround equipment You can set the audio output mode for each output terminal Selected item DescriptionOPTICAL/COAXIAL Digital Output or 2ch Audio Output NORMAL, Shift Dynamic Range Control Press a/b to select Audio Video SETTINGS, then press Enter Basic Operation for Audio Video SettingsExample Setting TV Aspect Ratio under Audio Video Setting Press c/d to select the desired format, then press Enter Press a/b to select Speaker SETTINGS, then press Enter Basic Operation for Speaker SettingsUsing multi channel speakers Using 2 channel speakers Checking the setup sound Press a/b/c/d to select the speaker, then press EnterPress a/b/c/d to select Test START, then press Enter Completing the settings Resetting the setupRepeat steps 9 and 10 until each speaker is reset Press a/b/c/d to select FINISH, then press Settings Quick Start Disc Language Disc Priority Language Parental ControlFor BD-ROM Level Language Code List Country Code List Press a/b to select Playback SETTING, then press Enter Basic Operation for Playback SettingExample Setting Parental Control under When setting the password for the ﬁrst time This item is for the customer service setting Example Setting Front DISPLAY/LEDCommon operation Appendix Troubleshooting Troubleshooting Error message Possible Error Suggested Solution On-screen Error MessagesMessages Relating to BD and DVD Occurs if an operation is incorrect Glossary BD-ROMDTS MPEG-2 Glossary General SpeciﬁcationsPlayback Input/Output 0201 Terms of Guarantee TINSEA124WJQZ

Sharp BD-HP20H Audio Connections, Connecting to the Digital Audio Terminal or Jack

Models: BD-HP20H