Playback Functions
Partial Repeat Playback
(Repeat Playback of a
Specifi ed Part)
Press REPEAT during playback.
Press c/d to select “SCENE
SELECTION”, then press ENTER.
1
2
Switching Audio
You can change the audio output channel using
AUDIO.
Each time AUDIO is pressed, the audio
channels (2 channels or multi audio)
change as follows:
PLAY BACK CHAPPLAY BACK TITLE
SCENE SELECTION
SET START POINT
NOTE
• Press LSKIP, the Repeat Playback is
cancelled and the next chapter being played back.
• Press KSKIP once, the Repeat Playback
is cancelled and the player returns to the start of
current chapter (track).
• If you press KSKIP again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
• For Partial Repeat Playback, set the start and end
points within the same title.
• Repeat Playback may be forbidden depending on
the disc.
• Partial Repeat Playback may not work in multi-
angle scenes.
• If you press DISPLAY, you can confi rm the Repeat
Playback status.
NOTE
• When you play a programme recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set “AUDIO OUT”
to “PCM” (page 36), or if you want to change the
audio channel, listen via the analogue output jacks.
“SET START POINT” displays.
Press ENTER at the scene where you
want.
• “SET END POINT” displays.
Press ENTER at the scene where
you want to set the end point.
• You can press V FWD to fast
forward to the scene where you want
to set the end point. When you reach
the desired scene, simply press I
PLAY and then ENTER to set the end
point. To cancel Repeat Playback,
press REPEAT-OFF.
3
4
Switching Subtitles
If subtitles are provided in multiple languages,
you can switch between them.
Press SUBTITLE during playback.
• The display indicates the subtitle number currently
being played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles
change.
• “– –” is displayed if a disc has no subtitles.
• You can also select “OFF”.
When a recorded broadcast with a
Secondary Audio Program is played back:
Switches between “L”, “R” and “L+R”.
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be
switched.)
The newly selected audio track will be
displayed.
DVD VIDEO
BD VIDEO
VR MODE
DVD-RW DVD-R
BD-RE BD-R
30
BD-HP20H_en_c.indd 30BD-HP20H_en_c.indd 30 2007/09/27 16:17:312007/09/27 16:17:31