Before Starting Playback
Using AQUOS LINK
Controlling the Blu-ray disc player using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control), with AQUOS LINK you can interactively operate this player with your SHARP AQUOS TV.
What you can do with AQUOS LINK
When you connect this player to the LCD TV compatible with AQUOS LINK using an HDMI cable, you can perform the functions listed below. (See page 14 for connecting to the HDMI terminal).
EAutomatic input select function
When you start playback of this player, the input selector of the LCD TV will automatically switch to the LCD TV input terminal connected to the player and the playback image will appear on the screen, even if you are watching a TV program.
EAutomatic power off function
If you turn off the LCD TV when this player is in stop mode, the power of this player will be turned off automatically. (However, when playing back a disc or other content using this player, the power does not turn off.)
EAutomatic power on function
When you switch to the LCD TV input terminal connected to this player, the power of this player will be turned on automatically.
EAQUOS PURE MODE
When you connect this player to an AQUOS LCD TV compatible with AQUOS LINK and set “AQUOS LINK” to “Yes” (page 40), images automatically adjusted to the most suitable image quality for the AQUOS TV are output from the HDMI OUT terminal of this player.
The AQUOS PURE MODE indicator on the player lights in green.
AQUOS PURE MODE indicator
NOTE
•In order to make AQUOS LINK available, set up AQUOS LINK on the LCD TV that is connected to this player. See page 40 regarding the setup of this player.
Refer to the Operation Manual of the TV for details regarding setup.
22
