Sharp BD-HP24U(A) operation manual Inputting characters manually, Input character list

SETTINGS

4 Repeat the step 3 to display all of the desired

The operation procedure forcharacters/numbers in the input field.

inputting characters manually

Example: The screen for inputting numeric characters

NOTE

•Numeric characters such as IP address can be entered on the input screen either by selecting each of the characters in the “Numeric” mode or using the Number buttons on the remote control.

IP Address 123

Netmask

Gateway

1Press ENTER at the boxes in which characters are to be entered, and the input screen will appear.

Numeric
Edit	1	2	3	4	5	6	7	8	9	0

Selected by	Selected by
pressing a/b	pressing c/d

2Press a/b to select the desired input mode.

3Press c/d to select a number/character, then press ENTER.

	123
Numeric
Edit
	1	2	3	4	5	6	7	8	9	0

NOTE

•Press nRETURN (Del.Char.) to delete a number/ character you have input.

•To change a number/character you have input, press B (Green) (Left) or C (Blue) (Right) to select the number/ character you want to change, and press nRETURN (Del.Char.). Then, press c/d to select a new number/ character you want to input, and press ENTER.

5Press D (Yellow) (Complete) to fix the numbers which have been input.

IP Address 123

Netmask

Gateway

6Repeat step 1 to 5 to finish inputting all the required characters.

Input character list

Numeric		1 2 3 4 5 6 7 8 9 0
Edit
	Cancel		Left	Right	Complete	Del.Char.

*The same operation as the colored buttons and nRETURN can be performed by selecting each of the items and pressing ENTER.

“Del.Char.” stands for deleting characters.

Settings

43