System connections
Make sure to unplug the AC power lead before making any connections.
AM loop aerial
Installing the AM loop
aerial
< Assembling >
< Attaching to the wall >
wall | screws |
| (not supplied) |
FM aerial 
Right speaker
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
TV
To video input socket
Video cable (not supplied)
Left 
speaker
Red
Black
■Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for better reception. When an external FM aerial is used, disconnect the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and GND terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
■Demonstration mode
●The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
●To cancel the demonstration mode, press the DEMO button (remote control) during power
●To return to the demonstration mode, press the DEMO button again.
■Connecting iPod to a TV
The iPod with photo and video can be viewed by connecting to a TV/ monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit.
■Speaker connection
●Connect the black wire to the minus
● Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.
● Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.
●Do not let the bare speaker wires
touch each other. | Incorrect |
●Do not allow any objects to fall into or to be placed in the bass reflex ducts.
●Do not stand or sit on the speakers. You may be injured.
Note:
Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s homepage for further information.
■AC power connection
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket If you plug in the unit first, the unit will enter the
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
6
