Sharp CV-P09FR operation manual Timer Operation, Off Timer, E-14

TIMER OPERATION

OFF TIMER

The unit will turn off automatically according to your setting.

Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour (30-minutes) increments and from 10 to 12 hours, in 1-hour increments.

1

Display shown when you set the unit to turn off 2.5 hours later.

Point the remote control at the signal receiver win- dow on the unit.

Press the OFF TIMER (	) button and set
1 the time as desired.

•The time setting will change as you press the button as follows.

0.5h 1.0h 1.5h10h 11h 12h

Hold the button down to speed through the set- tings.

• The orange TIMER lamp ( ) on the unit will light.

•The unit will emit a beep when it receives the signal.

•The time setting will count down to show the re- maining time.

TO CANCEL TIMER

Press the CANCEL button.

•The orange TIMER lamp on the unit will turn off.

NOTES ON TIMER SETTING AND OPERATION

•The latest time setting will be memorized and will appear on the remote control display the next time you set the OFF TIMER or ON TIMER.

•The OFF TIMER and ON TIMER can not be set together. Only the most recent TIMER setting will be valid.

•While the ONE-HOUR OFF TIMER is set, the OFF TIMER and ON TIMER is settings are unavailable.

•If the ONE-HOUR OFF TIMER is set while the OFF TIMER or ON TIMER activated, the ON TIMER or OFF TIMER setting will be cancelled.

•If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be can- celled and will not be retrieved even after the power is restored.

E-14