Sharp CV-P09FR operation manual On Timer, E-15, English

ON TIMER

The unit will turn on automatically according to your setting.

Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour (30-minute) increments and from 10 to 12 hours, in 1-hour increments.

Point the remote control at the signal receiver win- dow on the unit.

1 Press the ON TIMER ( ) button.

• The time setting will change as you press the button as follows.

0.5h 1.0h 1.5h10h 11h 12h

	Hold the button down to speed through the set-
1	tings.
	• The orange TIMER lamp ( ) on the unit will light.

• The unit will emit a beep when it receives the signal.

• The time setting will count down to show the remain- ing time.

Select the mode, temperature, fan speed setting and PLASMACLUSTER operation as desired.

• When the temperature is set with the ON TIMER, the temperature will show in the display for 5 seconds

	and then return to the time display.
•	If you do not change the setting, the unit will operate
	using the most recent setting.
Display shown when you set
the unit to turn on 6.5 hours	TO CANCEL TIMER
later.

Press the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

ENGLISH

E-15