DRAINAGE
Prepare for drainage and drain out water within the unit in the following cases.
If the unit stops operating and the TIMER ( 
), OPERATION ( 
) and TURBO COOL ( 
) lamps are blinking. (This indicates that the water tank inside the unit is full.)
1 Make sure to turn the unit off.
2 Turn the drainage nozzle to the OPEN position.
3 Pull the stopcock out from the drainage nozzle.
•When the stopcock is removed, a small amount of water may be discharged from the drainage nozzle.
4 Insert the hose clamp into a standard com- mercially available hose (12.7 mm inner di- ameter, 16.7 mm outer diameter).
5 Attach the hose to the drainage nozzle, and secure it with the hose clamp.
•Prepare for draining, as drain water will come out through the hose during operation.
6 Press the AUX. button on the unit twice.
• The water will drain out through the drainage hose. Mximum amount of water that may be drained out is approximately 2 liters.
• The OPERATION, TIMER and TURBO COOL lamps will be blinking.
Drainage nozzle
Stopcock
“OPEN position”
Hose clamp
Hose
ENGLISH
7 When drainage water stops running out from the hose, turn the unit off by pressing AUX. button.
• This would take about one minute.
8 Remove the hose from the drainage nozzle, and replace the stopcock.
• Keep the hose clamp in case of
9 Turn the drainage nozzle to the CLOSE position.
Whenever the unit is moved (to provent water within the unit from spilling). When the unit is not used for a long time.
1 Carry out the above procedures from 1 to 5. 2 Press the AUX. button on the unit.
•The water will drain out through the drainage hose.
Mximum amount of water that may be drained out is approximately 2 liters.
•The OPERATION lamps will light.
3 When drainage water stops running out from the hose, turn the unit off by pressing AUX. button.
• This would take about one minute.
4 Remove the hose from the drainage nozzle, and replace the stopcock.
• Keep the hose clamp in case of
5 | Turn the drainage nozzle to the CLOSE position. |
|
6 | Remove the stopcock from the drainpipe nozzle, and completely drain any | |
water within the unit. |
| |
| • Always prepare a receptacle to collect the water | Stopcock |
| before draining. Mximum amount of water that may |
|
| be drained out is approximately 0.2 liters. |
|
7 | Replace the stopcock to the drainpipe nozzle. | Drainpipe nozzle |
