PLASMACLUSTER OPERATION
The Plasmacluster ion generator inside the air conditioner will release positive and negative Plasmacluster ions into the room. Approximately the same numbers of posi-
tive and negative ions released into the air will reduce some airborn mold.
| Press the PLASMACLUSTER button during | |
| 1 operation. |
|
| • The remote control will display “ | ”. |
| • The blue PLASMACLUSTER lamp on the unit will | |
| light. |
|
| TO CANCEL |
|
1 | Press the PLASMACLUSTER button again. | |
• The PLASMACLUSTER lamp on the unit will turn off. | ||
NOTES:
• Use of the PLASMACLUSTER function will be memo- rized and it will be activated the next time you turn on the air conditioner.
• To turn off the PLASMACLUSTER Lamp, press the DISPLAY button.
•PLASMACLUSTER operation cannot be set during VENTILATION mode.
AUXILIARY MODE
Use this mode when the remote control is not available.
| 1 Press the AUX. button on the unit. |
| • The red OPERATION lamp ( ) on the unit |
| will light and the unit will start operating in |
1 | COOL mode. |
• The fan speed is set to AUTO. | |
• The temperature setting is automatically set |
according to the room temperature.
TO TURN OFF
Press the AUX. button again.
• The red OPERATION lamp ( 
) on the unit will turn off.
NOTES:
•If the AUX. button is pressed during normal operation, the unit will turn off.
•Upon starting AUXILIARY operation, the drainage pump inside the unit runs for about a minute, which may produce an audible gurgling sound.
