Sharp DK-KP85PH operation manual Listening to the sound, To finish listening, Check that

Listening to Bluetooth enabled devices (continued)

■■ Pairing with other Bluetooth source devices

1Press the ON/STAND-BY button to turn the power on.

2Press the BLUETOOTH / button (remote control) to select Bluetooth function. (PAIRING indicator blinks.)

3Press and hold the PAIRING button for 3 seconds or more.

PAIRING indicator blinks quickly. The unit is now in pairing mode and is ready to be paired with other Bluetooth source device.

4Perform pairing procedure on the source device to detect this unit. “SHARP DK-KP85” will appear in the detected devices list (if available) in the source device. (Refer the source device operating manual for details).

Notes:

●● Place the devices to be paired within 1 meter (3 feet) of each other when pairing.

●● Some source devices are unable to display lists of detected devices. To pair this unit with the source device, refer to the source device operating man- ual for details.

5Select “SHARP DK-KP85” from the source list. If Passcode* is required, enter “0000”.

* Passcode may be called PIN Code, Passkey, PIN number or Password.

6Pairing indicator (blue) will stop blinking once the unit is successfully paired with the source device. (Pairing information is now memorised in the unit.)

Some audio source devices may connect with the unit automatically after pairing is completed, oth- erwise follow the instructions in the source device operating manual to start connection.

7Press the play button on main unit, remote control or source device to start Bluetooth connection.

Notes:

●● If this unit or the source device is turned off before Blue- tooth connection is completed, pairing will not be com- pleted and the pairing information will not be memo- rised. Repeat step 1 onwards to start pairing again.

●● To pair with other devices, repeat steps 1 - 5 for each device.

●● Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to pair the device again.

●● When Bluetooth device is turned off, “Disconnected” is displayed briefly. Pairing LED turns off for a while and then will start blinking again.

■■ Listening to the sound

Check that:

●● The source device Bluetooth functionality is ON.

●● Pairing of this unit and the source device is completed.

●● Unit is in connected mode (pairing indicator (BLUE) lights up.)

1Press the ON/STAND-BY button to turn the power on.

2Press the FUNCTION button to select Bluetooth func- tion.

3Start the Bluetooth connection from the Bluetooth stereo audio source device.

4Press play button (on main unit, remote control or source device).

Notes:

If the source device has an extra bass function or equalizer function, set them to off. If these functions are on, sound may be distorted.

Notes:

●● You need to make the Bluetooth connection again if:

- the source device is not turned on, or its Bluetooth func- tionality is off or is in sleep mode.

●● During Bluetooth function, if the Bluetooth connected de- vice and the one connected to the AUDIO IN are played simultaneously, only the Bluetooth sound can be heard.

■■ To finish listening

Perform any of the followings.

-Disconnect the Bluetooth connection on the audio source device.

Refer the operating manual supplied with the device.

-Turn off the Bluetooth stereo audio source device.

-Turn off this unit.

Note:

The volume of this unit may not be controlled as intended depending on the device.

Bluetooth operation buttons (remote control only)

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.

Press the button to skip down.

Press and hold to fast reverse.

E-9