E-19
Notes:
●When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select “USB” or “AUDIO IN” in step 5.
●This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
Checking the timer setting:
Cancelling the timer setting:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
The radio, compact disc, iPod, USB, Audio In, Network can
all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.

Enhancing your system

The connection lead is not included. Purchase a
commercially available lead as shown below.
8To adjust the minutes, press the or button and
then press the ENTER button.
9Set the time to finish as in steps 7 and 8 above.
10Adjust the volume using the VOLUME control, and then
press the ENTER button. Do not turn the volume up too
high.
11Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
13When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected day.
It will continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
1Turn the power on and press and hold down the
CLOCK/TIMER button.
2Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3Within 10 seconds, press the or button to select
“Timer Call”, and press the ENTER button.
1Turn the power on and press and hold down the
CLOCK/TIMER button.
2Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3Within 10 seconds, press the or button to select
“Timer Off”, and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
1Turn the power on and press and hold down the
CLOCK/TIMER button.
2Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3Within 10 seconds, press the or button to select
“Timer On” , and press the ENTER button.
4Press the ON/STAND-BY button to enter the power
stand-by mode.
■Sleep operation
1Play back the desired sound source.
2Press the SLEEP button.
3Within 5 seconds, press the Numeric button to set the
time. (1 minute ~ 99 minutes)
4“SLEEP” will appear.
5The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
While “SLEEP” is indicated, press the SLEEP button.
1While “SLEEP” is indicated, press the SLEEP button.
2Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
■To use timer and sleep operation together
1Set the sleep time (see above, steps 1 - 5).
2While the sleep timer is set, set the timer playback
(steps 2 - 9, pages 18 - 19).
Desired time
1-99 minutes
Sleep operation will
automatically stop
Sleep timer
setting Timer playback
setting End
time
Timer playback
start time
Portable audio
player, etc. Audio cable
(not supplied)

Timer and sleep operation (Remote control only) (continued)