System connections (continued)
■Install/Replace backup batteries
Use 2 “AA” size batteries
1Open the battery cover.
Slide the cover in the direction of the arrow.
2Insert the batteries according to the direction indicated in the battery compartment.
3Close the cover.
Notes:
●Backup battery system to provide continuous alarm operation and clock setting in event of a power failure. If the battery low indicator display is flashing, replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all setting may be lost during battery replacement.
●Remove the batteries if the unit will not be used for a long period of time to prevent battery leakage which may cause potential damage.
Battery life:
Battery type | ALKALINE (AA) (1.5V) |
Usage time | Approx. P hrs. |
|
|
Note:
Battery life may vary depending on the temperature, battery types and usage conditions.
Precautions for battery use:
● Installing the batteries incorrectly may cause the unit to malfunction.
● Insert the batteries according to the direction indicated in the battery compartment.
● Replace all old batteries with new ones at the same time. ● Do not mix old and new batteries.
● Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Caution:
Do not use rechargeable batteries
Remote control (For DK-CL6N only)
■Battery installation
This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply. California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/
1Open the battery cover.
Slide the cover in the direction of the arrow.
Back of remote control
2Insert the battery according to the direction indicated in the battery compartment.
Positive (+) side up
Notes concerning use:
●Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase “CR 2032” 3 V, coin lithium battery.
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock, and vibrations.
■Test of the remote control
Check the remote control after checking all the connections (see pages 6 - 7).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below: Press the
Remote sensor
Precautions for battery use:
●Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
Caution:
●Do not use rechargeable battery
●Danger of explosion if battery is incorrectly replaced.
●Replace only with the same or equivalent type.
●Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
●Installing the battery incorrectly may cause the unit to malfunction.
|
|
| 8" - 20' |
15˚ | 15˚ | (0.2m - 6m) | |
| |||
|
| SLEEP |
|
|
| iPod |
|
|
| BAND |
|
|
| RADIO |
|
MENU | ENTER AUX |
| |
EQUALIZER |
|
|
7