Zoom ring
S INPUT 3
• When pressing the INPUT button on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4
• When using the remote control, press the CINPUT 1/CINPUT 2/DINPUT 3/EINPUT
4 button to switch the INPUT mode._P. 30
6. Adjust the focus, image size, and projector angle
On-screen display
4.Turn the video equipment on and start playback5.Select the INPUT mode

Select the “INPUT 3” using the INPUT button on the projector or D INPUT 3 on the remote

control.

On the On the remote projector control

1. Adjust the focus by

 

2. Adjust the projection

turning the focus ring.

 

image size by turning

 

 

 

the zoom ring.

 

 

Focus ring

Start Quick

3.Adjust the projector angle using the HEIGHT ADJUST lever.

_PP. 30, 31

7. Correct trapezoidal distortion

Correcting trapezoidal distortion using the Keystone Correction.

On the projector

Shrinks

Shrinks

upper side.

lower side.

On the remote control

_P. 33

8. Turn the Power off

Press the STANDBY/ON button on the projector or the STANDBY button on the remote control, and then press the button again while the confirmation message is displayed, to put the projector into standby mode.

On the

On the remote

On-screen Display

 

 

 

projector

control

 

 

• Unplug the power cord from the AC outlet after the cooling fan stops.

_P. 29

17