3Auto Power Off
| Function | |
|
| |
Selectable | Description | |
| items | |
|
| |
On |
| When no input signal is detected for |
|
| more than 15 minutes, the projector will |
|
| automatically enter standby mode. |
|
|
|
Off |
| The Auto Power Off function will be |
|
| disabled. |
|
|
|
Note
•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.
4Setting the Confirmation Sound (System Sound)
Selectable | Description | |
items | ||
| ||
|
| |
On | A confirmation sound is made when | |
| the projector turns on/off. | |
|
| |
Off | No confirmation sound is made. | |
|
|
Menu operation n Page 39
6Fan Mode Setting
This function changes the fan rotation speed.
Selectable | Description | |
items | ||
| ||
Normal | Suitable for normal environments. | |
|
| |
High | Select this when using the projector at | |
| altitudes of approximately 4,900 feet | |
| (1,500 meters) or more. | |
|
|
When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.
7Checking the Lamp Life Status
You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).
Lamp usage condition | Remaining lamp life | ||
|
|
|
|
| “Life” | 100% | 5% |
|
|
|
|
Operated exclusively | Approx. | Approx. | |
with Lamp Setting set to | 3,000 | 150 hours | |
“Eco + Quiet” | hours |
| |
|
|
|
|
Operated exclusively | Approx. | Approx. | |
with Lamp Setting set to | 2,000 | 100 hours | |
“Bright” | hours |
| |
|
|
|
|
5Speaker Setting
Selectable | Description | |
items | ||
| ||
|
| |
On | The audio signal is output from the | |
| internal speaker. | |
|
| |
Off | The audio signal is not output from the | |
| internal speaker. | |
|
|
Note
•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.
•The lamp life may vary depending on the us- age condition.
Features | Useful |
45