Connecting to Video Equipment

Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector first and then the other devices.

The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment.

The image quality is highest in the order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.

When connecting to equipment with component output terminal (INPUT1 or INPUT2)

 

 

Supplied

3 RCA to 15-pin

To audio output

accessory

D-sub adaptor

terminal

To component output

 

 

 

(Y, CB/PB, CR/PR) terminal

 

 

 

DVD, etc.

To INPUT1 terminal

To AUDIO (INPUT1, 2)

 

 

 

 

 

terminal

Component cable (commercially available)

ø3.5 mm minijack to RCA

3 RCA to 15-

audio cable* (commercially

pin D-sub

available)

adaptor

*Use the cable when you want to

 

enjoy the sound from the projector’s speaker.

Connections

23