Picture Adjustment (“Picture” menu) (Continued)

Menu operation n Page 39

2Adjusting the Image

Adjustment

O button

Q button

Items

 

 

 

 

 

Contrast

For less

For more

 

contrast.

contrast.

 

 

 

Bright

For less

For more

 

brightness.

brightness.

 

 

 

Color*1

For less color

For more color

 

intensity.

intensity.

 

 

 

Tint*1 *2

For making skin

For making skin

 

tones purplish.

tones greenish.

 

 

 

Sharp*1

For less

For more

 

sharpness.

sharpness.

 

 

 

Red

For weaker red.

For stronger red.

 

 

 

Blue

For weaker

For stronger

 

blue.

blue.

 

 

 

Bright Boost

For high fidelity

For more

 

color reproduc-

vividness.

 

tion.

 

*1 Not displayed in the RGB input mode.

*2 “Tone” will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust “Tone”, but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals .

Note

•To reset all adjustment items, select “Reset” and press hENTER.

4Progressive

Selectable

Description

items

 

 

 

2D

Useful to display fast-moving images

Progressive

such as sports.

 

 

3D

Useful to display relatively slow-

Progressive

moving images such as drama and

 

documentary more clearly.

Film Mode

Reproduces the image of film source*

 

clearly. Displays the optimized image of

 

film transformed with three-two pull down

 

(NTSC and PAL60Hz) or two-two pull

 

down (PAL50Hz and SECAM) enhance-

 

ment to progressive mode images.

 

 

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

Note

•In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

•When the image is blurred or noisy, switch to the optimal mode.

•When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be se- lected.

3Adjusting the Color Temperature

Selectable

 

Description

items

 

 

 

 

 

 

5500K

For lower color temperature for

6500K

warmer, reddish incandescent-like

7500K

images.

P

8500K

 

R

9300K

 

10500K

For higher color temperature for

 

cooler, bluish, fluorescent-like images.

 

 

 

Note

•Values on “CLR Temp” are only for general standard purposes.

5Lamp Setting

Select-

 

 

Power

 

Bright-

Fan

consumption

 

able

Lamp Life

ness

sound

(When using

items

 

 

 

AC 100V)

 

 

 

 

 

 

 

 

 

 

Eco +

Approx.

Low

305W

Approx.

Quiet

87%

 

 

3,000

 

 

 

 

hours

 

 

 

 

 

 

100%

Normal

350W

Approx.

Bright

 

 

 

2,000

 

 

 

 

hours

 

 

 

 

 

Note

•When “Lamp Setting” is set to “Eco+Quiet”, the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 13%.)

42