Troubleshooting (Continued)

Problem

 

Check

Page

 

 

 

 

Picture is green on

•

Change the input signal type setting.

 

INPUT 1 (Component)/

 

Select “Color is faded or poor” in the “Help” menu, and then select

 

INPUT 2 (Component).

 

an input signal type.

46

 

 

 

Picture is pink (no green)

 

 

 

 

 

on INPUT 1 (RGB)/INPUT

 

 

 

2 (RGB).

 

 

 

 

 

 

 

Picture flickers on INPUT

•

Select “Initiate “Auto Sync” Adjustments” after selecting “Vertical

 

1 (RGB)/INPUT 2 (RGB).

 

stripes or flickering image appear” in the “Help” menu, and then

 

 

 

press ENTER.

46

 

 

If the picture hasn't improved, select “Adjust horizontal noise”, and

 

 

 

then press ENTER. After that, press O or Q to adjust.

 

 

 

 

 

Picture is too bright and

•

Image adjustments are incorrectly set.

42

whitish.

 

 

 

The cooling fan becomes

•

When temperature inside the projector increases, the cooling fan

–

noisy.

 

runs faster.

 

The lamp does not light

•

The lamp indicator is illuminating in red.

 

up even after the

 

Replace the lamp.

48, 51

projector turns on.

 

 

 

 

 

 

The lamp suddenly turns

 

 

 

off during projection.

 

 

 

 

 

 

 

The image sometimes

•

Cables incorrectly connected to the projector or the connected

23–27

flickers.

 

equipment works improperly.

46

 

•

Select “Vertical stripes or flickering image appear” in the “Help”

 

 

menu and make the necessary adjustments.

51

 

•

If this happens frequently, replace the lamp.

 

 

 

 

The lamp needs much

•

The lamp will eventually need to be changed.

51

time to turn on.

 

While the remaining lamp life draws to a close, replace the lamp.

 

Picture is dark.

 

 

 

 

 

 

 

This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes.

Service Information (For the U.S.)

For the location of the nearest Sharp Authorized Service Center, or to obtain product litera- ture, accessories, supplies or customer assistance, please call 1-800-BE-SHARP (1-800-237- 4277) or visit SHARP’s website (http://www.sharpusa.com).

56