Sharp DT-300 and Setup Connections, 2 Connect the above adaptor to an RGB cable, 3 Connect the above cable to the video equipment

Connecting to RGB Video Equipment Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 2)

Use the DVI to 15-pin D-sub adaptor and the RGB cable when connecting RGB video equipment such as DVD players and DTV decoders to INPUT 2 terminal.

1 Connect a DVI to 15-pin D-sub adaptor to the projector.

2 Connect the above adaptor to an RGB cable.

3 Connect the above cable to the video equipment.

•Secure the connectors by tightening the thumbscrews.

Note

•When connecting this projector to DVI out- put of the DTV decoder, select “RGB” for

“Signal Type” on the OSD menu or press on the remote control. (See page 52.)

DT-300_E_p13_28.p65 Page 19

Optional

accessory DVI to 15-pin D-sub adaptor

Type: AN-A1DV (7.9" (20 cm))

To INPUT 2 terminal

DVI to 15-pin D-sub adaptor (sold separately)

RGB cable (commercially available)

To RGB output terminal

DVD player or

DTV decoder

-19

03.10.29, 2:39 PM Adobe PageMaker 6.5J/PPC

and Setup Connections