Using the “Options” Menu

Automatic Power Shutoff Function

When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if set to “” (ON).

Select “Auto Power Off” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

Projector automatically enters the standby mode after 15 minutes without an input signal.

Automatic Power Shut-off disabled.

Note

•“Auto Power Off” is factory preset to “”.

•When the Auto Power Off function is set to

“ (ON)”, 5 minutes before the projector enters the standby mode, the message “En- ter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

Selecting the MenuScreen Position

This function allows you to select the desired position of the menu screen.

Select “Menu Position” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

 

 

Center

The menu is displayed on the

 

center of the image.

Upper

The menu is displayed on the

Right

upper right of the image.

Lower

The menu is displayed on the

Right

lower right of the image.

Upper

The menu is displayed on the

Left

upper left of the image.

Lower

The menu is displayed on the

Left

lower left of the image.

 

 

-54

On-screen Display

On-screen Display

DT-300_E_p51_56.p65

Page 54

03.10.29, 2:46 PM Adobe PageMaker 6.5J/PPC