Using the Kensington Lock
This projector has a Kensington Secu-
rity Standard connector for use with aRear View Kensington MicroSaver Security Sys-
tem. Refer to the information that came with the system for instructions on how to use it to secure the projector.
Kensington Security Standard connector
Troubleshooting
Problem | Check |
|
|
No picture appears. | • Projector power cord is not plugged into the wall outlet. |
| • Selected input is wrong. (See page 31.) |
| • Cables incorrectly connected to back panel of the projector. (See pages |
| |
| • “Contrast” and “Bright” adjustments are set to minimum position. (See |
| page 44.) |
|
|
Color is faded or poor. | • Picture adjustments are not correct. (See page 44.) |
|
|
Picture is blurred. | • Adjust the focus. (See page 25.) |
| • Projection distance is too long or too short to allow for proper focus. (See |
| pages 26 and 27.) |
|
|
No OSD appears. | • OSD Display is set to “OFF”, preventing to display some or all |
| Displays. (See page 51.) |
|
|
An unusual sound is | • If the picture is normal, the sound is due to cabinet shrinkage caused by |
occasionally heard from the | temperature changes. This will not affect operation or performance of the |
cabinet. | projector. |
|
|
Maintenance indicator | • Refer to “Maintenance Indicators” on page 58. |
illuminates. |
|
|
|
Picture noise appears. | • Adjust the “Phase” setting. (See page 48.) |
|
|
Image is green on INPUT 2 | • Change the input signal type. (See page 52.) |
Component. |
|
Image is pink (no green) on |
|
INPUT 2 RGB. |
|
|
|
Service Information (For the U.S.)
For the location of the nearest Sharp Authorized Service Center, or to obtain product litera- ture, accessories, supplies or customer assistance, please call
Appendix
-63
Page 63 | 03.10.29, 2:48 PM Adobe PageMaker 6.5J/PPC |