Specifications

Product type

Projector

Model

DT-300

Video system

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43

 

DTV 480I/480P/720P/1080I

Display method

DLP chip, RGB optical shutter method

DLP panel

Panel size: 0.6￿

 

Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments

 

Drive method: Digital Light Processing (DLP™)

 

No. of dots: 589,824 dots (1,024 [H] ￿ 576 [V])

Lens

1–1.2 ￿ zoom lens, F2.0–2.4, f=16.9–20.2 mm

Projection lamp

210 W/168 W SHP lamp

Video input signal

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω

 

terminated

S-video input signal

4-pin Mini DIN connector (INPUT 3)

 

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Component input signal RCA Connector

(INPUT 1) Y: 1.0 Vp-p, sync negative, 75 Ω terminated

PB: 0.7 Vp-p, 75 Ω terminated

PR: 0.7 Vp-p, 75 Ω terminated

Component input signal 29-pin connector

(INPUT 2) DVI input signal: Digital 250–1,000 mV 50 Ω Analog 0.7 Vp-p 75 Ω

Y:1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated

PR: 0.7 Vp-p, 75 Ω terminated

Horizontal resolution

520 TV lines (NTSC 3.58 input)

RGB input signal

DVI-I terminal

 

 

<Digital>

 

50 Ω

 

Input impedance

 

Input level

250-1000 mV

 

<Analog>

 

75 Ω

 

Input impedance

 

Input level

0.7 Vp-p

 

<Synchronization signal>

•Separate sync/Composite sync

 

Input level TTL level

 

Input impedance

1 KΩ

 

• Green on sync

 

 

Input level (Synchronizing input) 0.286 Vp-p

 

Input impedance

75 Ω

Pixel clock

12–80 MHz

 

Vertical frequency

43–75 Hz

 

Horizontal frequency

15–70 kHz

 

Rated voltage

AC 100–240 V

 

Input current

3.2 A

 

Rated frequency

50/60 Hz

 

Power consumption

285 W

 

Heat dissipation

1,070 BTU/hour

 

Operating temperature

41°F to 95°F (￿5°C to ￿35°C)

Storage temperature

￿4°F to 140°F (￿20°C to ￿60°C)

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

141⁄2￿ (W) ￿ 69⁄16￿ (H) ￿ 127⁄8￿ (D) (368 ￿ 153.8 ￿ 327 mm) (including swivel stand)

 

141⁄2￿ (W) ￿ 45⁄8￿ (H) ￿ 127⁄8￿ (D) (368 ￿ 118 ￿ 327 mm) (main body only)

Weight (approx.)

10.1 lbs. (4.6 kg) (including swivel stand)

 

9.0 lbs. (4.1 kg) (main body only)

Supplied accessories

Remote control, Two AA size batteries, Power cord, Video cable, Lens cap (attached on

 

the body), Operation manual

Replacement parts

Lamp unit (Lamp/cage module) (BQC-XVZ200++1), Remote control

 

(RRMCGA218WJSA), AA size batteries, Power cord (QACCDA007WJPZ), Video cable

 

(QCNWGA001WJZZ), Lens cap (CCAPHA004WJ01), Operation manual (TINS-

 

B006WJZZ)

 

This SHARP projector uses a DMD chip. This very sophisticated chip contains 589,824 pixels. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.

This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. If you have any questions about this matter, please call toll free 1-800-BE-SHARP (1-800-237- 4277). U.S.A. ONLY

-66

Specifications are subject to change without notice.

DT-300_E_p57_66.p65

Page 66

03.10.29, 2:48 PM Adobe PageMaker 6.5J/PPC