Quick Guide

In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to each page for details.

Introduction

Required equipments

Projector

Remote control

 

Insert the batteries.

 

(Page 11)

1.Place the projector facing a wall or a screen.

2.Connect to video equipment. (Page 16)

Video cable

To INPUT 4

terminal

 

To video output terminal

Video equipment

Power cord

Video cable

6.Turn the projector on using on the remote control. (Page 30)

 

ON button

INPUT 4 button

The power indicator

 

illuminates green.

7.Press on the remote control to select the INPUT 4 mode. (Page 31)

"On-screen Display

8.Turn on the video equipment.

ON

3. Connect the output terminal of the video equip-

ment to the input terminal of the audio equip- 9. Play the video.

ment using an audio cable.

10.Adjust the image size, image position and the

4. Plug the power cord into the AC socket of the focus. (Page 25) projector and into the wall outlet. (Page 14)

5. Remove the lens cap from the lens.

Adjust the zooming by

Adjust the height of the image

moving the zoom knob.

by rotating the lens shift dial.

Lens cap

 

 

 

Adjust the focus by

 

 

rotating the focus ring.

 

 

Note

 

Power cord

This projector can also be connected to a computer

 

as well as to video equipment. (Page 21)

-7

DT-300_E_p04_12.p65

Page 7

03.10.29, 2:38 PM Adobe PageMaker 6.5J/PPC