E-24

SD-AT50(U)E3.fm02/7/19
SD-AT50
ENGLISH
7
DX-AT50
Preparation for Use
- Setting the clock -
Setting the clock
By setting the AV control unit on time, you can use it not only as a clock but also for
timer playback.
[Front]
In this example, the clock is set for 9:30 AM.
To confirm the time display:
Press the TIMER button on the remote control.
The time display will appear for about 5 seconds.
Caution:
Unplugging the DVD player and the subwoofer/amplifier unit or power failure will
clear the clock setting.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from the beginning.
!In step 1, the time will be displayed.
!Follow steps 2 - 4.
Note:
You can set the clock even when the power is off.
1Press the TIMER button.
2Within 5 seconds, press the ENTER button.
3Press the or button to adjust the
hour and then press the ENTER but-
ton.
"AM 12:00" is 12 o'clock midnight.
"PM 12:00" is 12 o'clock noon.
!Press the or button once to advance the time by 1 hour. Hold it down to
advance continuously.
!The 12-hour display will appear.
!"AM" will change to "PM" automatically.
4Press the or button to adjust the
minutes and then press the ENTER
button.
!Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.
!The hour will not advance even if minutes advance from "59" to "00".
!The clock starts from "0" second. (Seconds are not displayed.)
!The display returns to normal after approx. 2 seconds.