E-44
SD-AT50(U)E5.fm02/7/19
SD-AT50
ENGLISH
7
DX-AT50
Advanced Features
- Timer and sleep operation -

To check the timer setting: Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the same setting,
perform the following operations.

Changing the timer setting:

Turn the power on, and repeat the operation from step 1 in "Setting the timer" (page
43).

Canceling the timer playback:

Timer playback is canceled by turning the power on while in the timer playback
stand-by mode. The same operation can be performed in the following procedure
without turning the power on.
Caution:
!The contents of the setting will be erased if the system is unplugged or a power
failure occurs. In such cases, set the timer again.
!This system cannot set the timer of other equipment.
!When setting the timer playback using the digital tuner, TV, VCR, or the connected
equipment should be set to timer playback at the same time.
Note:
The timer operation is disabled with discs containing menus.
1 While in the timer playback stand-by mode,
press the TIMER button.
2 Within 10 seconds, press the or button to select "TIMER CALL", and press
the ENTER button.
The system returns to the timer playback stand-by mode after the setting con-
tents are displayed in order.

When the start time is reached:

Playback starts automatically and the volume increases gradually.
The timer playback indicator flashes.
Timer play indicator Timer set Indicator

When the finish time is reached:

The system is set to the power stand-by mode automatically.
1 Turn the power on and press the TIMER button.
Set the AV control unit on time if "TIMER STANDBY" does not appear.
2 Within 10 seconds, press the ENTER button.
After the setting contents are displayed in order, the system is set to the timer play-
back stand-by mode.
1 Press the TIMER button.
"TIMER CANCEL" will appear.
2 Within 10 seconds, press the ENTER button.
Timer playback will be canceled (the contents of the setting will not be canceled).