Sharp DX-AT50, SD-AT50 Listening to the radio

E-25
SD-AT50(U)E3.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Basic Operation
- Listening to the radio -
Listening to the radio
[Front]
To receive an FM stereo transmission:
Press the BAND button to display the "STEREO" indicator.
!"ST" will appear when an FM broadcast is in stereo.
!If the FM reception is weak, press the BAND button to extinguish the "STEREO"
indicator. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1Press the ON/STAND-BY button to turn the power on.
2Press the FUNCTION button to display FM or AM, and then the
BAND button repeatedly to select the desired frequency band (FM
STEREO, FM or AM).
3Press the or button to tune in to the desired station.
Manual tuning:
Press the or button as many times as required to tune in to the desired
station.
Auto tuning:
When the or button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
!When radio interference occurs, auto scan tuning may stop automatically at
that point.
!Auto scan tuning will skip weak signal stations.
!To stop the auto tuning, press the or button again.
FM stereo receiving indicator
FM stereo mode indicator