E-40
SD-AT50(U)E4.fm02/7/19
SD-AT50
ENGLISH
7
DX-AT50
Advanced Features
- Changing the registration in the remote control -
Changing the registration in the remote control
Sharp's TVs can be operated with the remote control of this system without register-
ing the operation (except for some models). (See page 47.) You can also operate
TVs of other manufacturers by changing the registration in the remote control.

"Changing the TV registration

Use buttons on both sides of the remote control.
Notes:
!As for manufacturers with 2 or more setting numbers, select one of those numbers
with which you can operate the TV.
!The number will not be set unless the registration is completed within 30 seconds.
In that case, try registration again.
!Once you set a number, the number previously memorized will be canceled.
!After replacing the batteries in the remote control, the registered number may
automatically be set to 01 (SHARP). If it occurs, register the desired number
again.
!Registration cannot be executed depending on TVs. Even if numbers can be set,
some buttons may not work.
[Front] [Back] 1While holding down the TV ON/STAND-BY button, press the TV
CHANNEL button.
2Enter the manufacturer setting number (2 digits) with the direct
buttons (0 - 9) and press the TV ON/STAND-BY button.
The setting is registered and the TV can be operated with the remote control of
this system.
TV manufacturer Setting number TV manufacturer Setting number
SHARP 01(*), 02 EMERSON 37, 38, 39, 40
PANASONIC 03, 04, 05 FISHER 23
JVC 06, 07, 08 GE 41, 42
SONY 09 GOLDSTAR 43
MITSUBISHI 10, 11, 12, 13 MAGNAVOX 44, 45
HITACHI 14, 15, 16, 17 RCA 46, 47, 48, 49
TOSHIBA 18, 19 ZENITH 50, 51
PIONEER 20 PHILI PS 52, 53
SANYO 21, 22, 23, 24 THOMSON 54
FUJITSU 25 GRUNDIG 55
AIWA 26 FERGUSON 56, 57
FUNAI 27, 28, 29, 30, 31,
32 ITT NOKIA 58, 59
SAMSUNG 33, 34, 35, 36 LOEWE 60, 61
(*):The default manufacturer number is 01 (SHARP).